Instruction manual

Concerto — Instruction Manual 23
Module Identification
Figure 3. Block Diagram for Module in Slot 1 in Analog Audio Mono 256x256 Matrix
64 Inputs
(1A/1B to
32A/32B)
from Slot 1
backplane
Input (1A/1B to
32A/32B) Distribution
to Slots 2, 3, & 4
64 Inputs
(33A/33B to 64A/64B)
from Matrix 2
64 Inputs
(97A/97B to 128A/128B)
from Matrix 4
64 Inputs
(65A/65B to 96A/96B)
from Matrix 3
64 Outputs
(1A/1B to
32A/32B)
to Slot 1
backplane
Time
Division
Multiplexing
256x64
64x1
Monitor
Crosspoint
A to D
Converter
D to A
Converter
8138_00_63r0
Module Identification
The modules have either a 128x32, 64x32, or a 32x32 Crosspoint configura-
tion. The 64x32 Crosspoint configuration will allow two modules to create
a 64x64 m
atrix but will not allow larger matrices. The 64x32 Crosspoint
modules can only be used in slots 1 (top) and 2 or slots 3 and 4 of the 7 RU
Concerto or 8 RU Concerto+ frames to create 64x64 matrices. The 32x32
Crosspoint configuration modules cannot be combined into larger matrices
but can be used in all of the Concerto frames. The Analog audio matrices
also have three Maximum Input Level specifications +24 dBu, +18 dBu, and
+15 dBu. The attributes of each module are identified by the last two digits
of the part number.
Table 1 ident
ifies Analog video modules.
Table 1. Analog Video Modules 671-6369-##
## Range Matrix Size Modules
00-49 128x128 4
96x96 3
64x64 2
32x32 1
50-79 64x64
a
If a 7 RU Concerto or 8 RU Concerto+ frame is used to create this matrix the modules
must be placed in slots 1 and 2 or slots 3 and 4
a
2
32x32 1
80-99 32x32 1