Instruction manual

Concerto — Instruction Manual 43
4 RU Frame
shown for the DIP switch banks indicate which of the eight switches should
be set in the
On position.
Table 24. Rotary and DIP Switch Settings for Jupiter Interface
Jupiter Settings for Options from T
able 23
1 2 3 4 5 6
Switches
Rotary S12 2 2 2 2 2 2
Rotary S13 0 0 4 4 E 4
A_LEVEL 1 1, 2, 3 2 6 5 2
A_OPTIONS - - - - - -
B_LEVEL 1 1, 2, 3 2 6 5 2
B_OPTIONS - - - - - -
DIP Switches set to ON Position
32x32 / 32x32
Table 25 and Figure 13 shows the optimum module placement for creating
two single module 32x32 matrices. Additional
combinations are created
using mixed audio, or mixed video, or mixed data modules.
Table 25. Examples of Optimum Matrix Configurations (32x32, 32x32, 32x32, and 32x32)
Four 32x32 Matrices
Slot
Position
Option 1
Module
s
Option 2
Modules
Option 3
Modules
Option 4
Modules
Option 5
Modules
Option 6
Modules
Option 7
Modules
Option 8
Modules
Option 9
Modules
Option 10
Modules
Matrix
Size
1 AV AV AV AV DV DV DV AA AA DA 32x32
2 DV AA DA TCP AA DA TCP DA TCP TCP 32x32
Figure 13. Two 32x32 Module Configuration and Signal Flow
8138_05_170r0
Power
Supply 2
Controller 1
Controller 2
Power
Supply 1
Input 1-32 Xpt (In=1-32, Out=1-32) Output 1-32
32x32
Matrix
Input 1-32 Xpt (In=1-32, Out=1-32) Output 1-32
32x32
Matrix
8138_05_171r0
Inputs 1-32 Outputs 1-32
Xpt (In=1-32,
Out=1-32)
Inputs 1-32
Xpt (In=1-32,
Out=1-32)
Outputs 1-32
Signal Flow for Options 1 to 10
Table 26 shows the Jupiter interface settings. Options 4 to 7 show settings
for SD Video modules in slot 1. Option 1 shows settings for SD video
mod
ule in slot 2. Options 4, 7, 9, and 10 show settings for Port modules. The