Instruction manual

52 Concerto — Instruction Manual
Section 1 — System Description
TDM: 160x160 / 96x96
In this configuration three modules in the expansion frame are not Audio
modules. Figure 26 shows the Signal Flow of a 160x160 and a 96x96 matrix.
The Signal Flow is independent of the slot positions in the expansion frame.
Figure 26. 160x160 and 96x96 Signal Flow
8138_04_107r0
Xpt (In=1-128,
Out=1-32)
Inputs 97-128
Outputs 97-128
Xpt (In=1-128,
Out=33-64)
Xpt (In=1-128,
Out=65-96)
Xpt (In=1-128,
Out=97-128)
Inputs 33-64
A to D Conv.
Inputs 65-96
A to D Conv.
Outputs 65-96
D to A Conv.
Outputs 33-64
D to A Conv.
Outputs 1-32
D to A Conv.
Inputs 1-32
A to D Conv.
Xpt (In=129-160,
Out=129-160)
Outputs 129-160
D to A Conv.
Inputs 129-160
A to D Conv.
TDM
Outputs 1-64
Outputs 65-128
Inputs 129-160
TDM
Inputs 1-64
Inputs 65-128
Outputs 129-160
Xpt (In=1-96,
Out=33-64)
Outputs 33-64
Inputs 33-64
Outputs 65-96
Xpt (In=1-96,
Out=65-96)
Inputs 65-96
Xpt (In=1-96,
Out=1-32)
Outputs 1-32Inputs 1-32
Figure 27 shows the configuration of the two frames with a single TDM
submodule attached to the Audio modules in s
lot 1 of each frame. Three
Data modules are in slots 2, 3, and 4 of the expansion frame.
Figure 27. 160x160 Audio and 96x96 Data
Power
Supply 2
Controller 1
Controller 2
Power
Supply 1
Input 65-96 Xpt (In=1-96, Out=65-96) Output 65-96
Input 129-160 Xpt (In=129-160, Out=129-160) Output 129-160
Input 33-64 Xpt (In=1-96, Out=33-64) Output 33-64
8138_00_122
Power
Supply 2
Controller 1
Controller 2
Power
Supply 1
Input 97-128 Xpt (In=1-128, Out=97-128) Output 97-128
Input 65-96 Xpt (In=1-128, Out=65-96) Output 65-96
Input 33-64 Xpt (In=1-128, Out=33-64) Output 33-64
Input 1-32 Xpt (In=1-128, Out=1-32) Output 1-32
160x160
Matrix
96x96
Matrix
Input 1-32 Xpt (In=1-96, Out=1-32) Output 1-32
TDM TDM