Instruction manual

70 Concerto — Instruction Manual
Section 2 — Installation
Cabling
Table 32 contains a compilation of the connectors found on the Concerto
router. Table 33 contains a compilation of the connectors and label varia-
tions found on the Matrix Module Backpl
anes. The Gender column indi-
cates the gender of the connector found
on the frame. The Details column
contains information to assist in using the connector.
Table 32. Connectors Found on Concerto Frame
Label
Connector
Details
Type Gender
AES REF BNC Female Synchronous audio references use unbalanced 75 ohm connector, terminator, and coaxial cable.
Loop-thru cabling supported.
ALARM D-9 Pin Female Audio Alarm use serial/machine cable.
DC PWR
4 and 7 RU frames
8 RU frame
Terminal Block
Barrier Strip
Male
NA
Use 3-conductor 12 AWG (3.31 mm
2
) wire for DC power connection.
E-NET 1 and
E-NET 2
RJ45 Female Ethernet network communication interface is 10Base-T and
100Base-T compatible use Category
5 cable, 8 conductor twisted pair. All Ethernet connections need to be routed through switches.
EXT-COM1 and
EXT-COM2
D-9 Pin Female External Control (factory use) use serial/machine cable.
VIDEO REF 1 and 2 BNC Female Video reference use unbalanced 75 ohm connector
, terminator, and coaxial cable. Loop-thru
cabling supported.
Table 33. Connectors Found on Module Backplanes
Label Module
a
Connector
Details
Type Gender
EXP IN 1 and 2
EXP OUT 1 and 2
AA, DA
BNC Female Use unbalanced 75 ohm connector and coaxial cable.
INPUTS AV, DA, DV BNC Female Use unbalanced 75 ohm connector and coaxial cable.
AA, DA, TC 50 Pin D Female Use balanced 110 ohm connector and shielded twisted pair cable.
AA Terminal
Block
Male Single wire compression for solid or
stranded cable 28-20 AWG (.081 to.518 mm
2
)
DA, TC
Single wire compression for solid or stranded cable 28-20 AWG (.081 to.518 mm
2
) Use
balanced 110 ohm shielded twisted pair cable.
PT 9 Pin D Female Use balanced 110 ohm connector and shielded twisted pair cable
MON IN, MON OUT, and
MONITOR IN and OUT
AA, DA 9 Pin D Female Monitor input use balanced 110 ohm connector and shielded twisted pair cable
AV, DA, DV BNC Female Monitor input use an unbalanced 75 ohm connector and coaxial cable.
AA Terminal
Block
Male Single wire compression for solid or
stranded cable 28-20 AWG (.081 to.518 mm
2
)
DA
Single wire compression for solid or stranded cable 28-20 AWG (.081 to.518 mm
2
) Use
balanced 110 ohm shielded twisted pair cable.
OUTPUTS AV, DA, DV BNC Female Use unbalanced 75 ohm connector and coaxial cable.
AA, DA, TC 50 Pin D Female Use balanced 110 ohm connector and shielded twisted pair cable.
AA Terminal
Block
Male Single wire compression for solid or stranded cable 28-20 AWG (.081 to.518 mm
2
)
DA, TC
Single wire compression for solid or stranded cable 28-20 AWG (.081 to.518 mm
2
) Use
balanced 110 ohm shielded twisted pair cable.
PT 9 Pin D Female Use balanced 110 ohm connector and shielded twisted pair cable