Instruction manual

92 Concerto — Instruction Manual
Section 2 — Installation
9. Secure the TDM submodule to the Audio module by finger tightening
the four nuts to the submodule on the front side of the Audio module.
See
Figure 54, the Audio module will be on the plastic pin between the
spacer and the nut.
10. Align the Audio module in the appropriate frame slot.
11. Slide the module into the frame.
12. Gently push the module to engage the backplane.
13. Close the ejector tabs.
Repeat this procedure for installing each of your TDM submodules.