Instruction manual

98 Concerto — Instruction Manual
Section 3 — Control System Configuration
Figure 58. Concerto Matrix Network Configuration
Software Updates
When you’re ready to update Concerto’s software, follow these steps.
CAUTION This procedure will take your Concerto(s) off line during the final step.
1. Ensure that the PC you’re using is connected to the same network as
your Concerto, and that NetConfig and the Concerto software has been
loaded onto the PC.
2. Launch NetConfig and select your Concerto in either the IP or Device
view in the left pane of NetConfig’s main window.
3. Choose Update Device Software on the Configure menu.
4. When the Update Devices dialog box (Figure 59) appears, navigate
through the hierarchy on the left to find your Concerto Controllers.
5. When your Concerto(s) appear in the right pane, click the Select All
button.