Instruction manual

114 JUPITER CM-4400 Control Module Installation and Operating Manual
Section 5 — The Configurator Application
Uploading a Configuration File from AccuSwitch
The Configuration Info and Set Upload application will upload the active
configuration from a specified Control Module (CM). When you select a
CM-4400 and then select the Upload Source option (Tools > CM4000 Con-
figuration Info and Set Upload), the curr
ent _Active.zip file (Jupiter\Log-
data\_Active.zip) is deleted an
d the new _Active.zip and _Prev.zip files
will then automatically be sent to the Jupiter File Server using TFTP.
The Jupiter “Configuration Editor” is used
to unzip, open, edit, and
compile the Current or Previous sets.
Follow these steps to upload a Configuration File:
1. Run the Jupiter Network Suite (JNS) (For example, Start> Programs>
Jupiter Network Suite).
2. Select the CM-4000 Configuration Info and Set Upload option (Tools>
CM-4000 Configuration Info and Set Upload) from the JNS Console.
Note The Tools menu is only enabled when the JNS Servers are disconnected.
Figure 77. The CM-4000 Configuration Info and Set Upload option
The CM-4000 Configuration Information screen will then appear. Infor-
mation for each active CM-4000 on the
PC's subnet that is running is
displayed.