Instruction manual

120 JUPITER CM-4400 Control Module Installation and Operating Manual
Section 5 — The Configurator Application
Auto Complete Feature
• The editor will Auto Complete or suggest the remaining letters of a
word, that has been used before.
• To accept the auto completed entry, press the TAB key; otherwise,
continue typing the new entry.
Drop-Down Lists
• When a field requires a selection to be made from a fixed list, click
anywhere in the field to cause a drop-down arrow to appear.
• Click the drop-down arrow to show the list of available choices (or
press the
ALT+DOWN key combination).
• Select the preferred choice. (You can also enter the first letter in the
list item name; enter the letter again to move to the next item that
starts with that letter, then press the
ENTER key.)
Error Detection and Explanation
• Cells that contain insufficient or inappropriate information will be
highlighted in red.
• Moving the cursor over the field will cause a Help window to
appear.
3. Press the TAB key to accept the change and advance to the next cell.
4. Press the ENTER key when you want to add a new row and to advance
to that row.
5. Click the Apply button to save the changes in memory (However,
changes are not saved to disk until they are saved by selecting File>
Save).
Note If you attempt to edit another table before applying your changes, a pop-up
message will appear asking you to confirm or abandon the changes you have
made before editing a new table.
6. Select the Save option from the File menu (File > Save) after Applying
all changes. The message “Exporting...” will appear.
For best practice, use letters and numbers only when creating a name for a
Jupiter set, table, control panel, or other device. In some cases spaces are not
allowed in names and will not be entered.
Note You can quit the program without having the changes bring applied by
selecting the Exit command from the File menu (File > Exit) and then selecting
the No button.