Instruction manual
JUPITER CM-4400 Control Module Installation and Operating Manual 121
AccuSwitch Configuration File Overview
Navigating and Copying Rows
The table below displays the key strokes that can be used to navigate and
copy rows.
Note To copy rows and insert them in the middle of a table, see Reordering Jupiter
Tables below.
Reordering Jupiter Tables
CAUTION It is possible to reorder Jupiter tables, but this can be very disruptive if not
done carefully. The order of entries in certain tables is significant because row
numbers are used as cross-references to other tables. If data is moved from
one row to another, these relationships may be broken and system operation
will be unpredictable.
Add new items at the end of the table if possible. If you wish to reorder
table data then you must be prepared to clear battery-protected memory
(Pmem) in the system controller and re-establish switcher status and
machine links. Clearing Pmem is described in Clearing Persistent Memory
(PMEM) on page 106.
Inserting a New Row In The Middle of the Table
Follow these steps to insert a new row in the middle of the table:
1. Click the numbered row box above the row where the new row is to
appear.
2. Press the Insert key on the Key board. (Or, select the Insert Row option
from the Edit menu.) The Row will appear below the selected row
(Figure 83 on page 122).
Table 4. Navigating and Copying Commands
Commands Descriptions
Ctrl+Down-Arrow key combination Pressing the Ctrl+Down-Arrow key combination will jump the cursor to
the bottom of a table.
Ctrl+Up-Arrow key combination Pressing the Ctrl+Up-Arrow key combination will jump the cursor to the
top of a table.
Page Down button Pressing and holding the Page Down key will scroll to the bottom of a
table.
You can also “drag” the scroll box, or click and hold on the scroll bar.
Insert Key Will add a row to insert information. To add rows to the bottom of the
table:
• Select the row number boxes of the source rows (the rows selected
must form a single rectangle).
• Copy the rows
• Go to the bottom of the page.
• Press the INSERT key.
• Paste the information into the row.










