Instruction manual

142 JUPITER CM-4400 Control Module Installation and Operating Manual
Section 5 — The Configurator Application
Printing
Printer installation was discussed in Printers on page 72. If you want to print
a single table, bring the t
able’s window to the top of the desktop. Then
select the “Print” command button on the bottom of the window.
Note Printing an entire set is not supported.
On-line Help
Two levels of Help are available for the Configurator:
• Toot-tips, whereby the name of a tool
will appear when the cursor
remains stationary over the icon for that tool
• Implicit Help, where a brief explanation of a field’s purpose or require-
ments will appear along the bottom of the window when the field is
selected.
In addition, an Adobe Acrobat version of the manual you are now reading
c
an be accessed by selecting the Help pull-down menu. The Acrobat
Reader application must be installed to view the manual.
Inadvertent Loss of Power
Following a power interruption, the Jupiter controller board(s) will reset
itself and should be back in operation in a few seconds. The CM-4400 uses
Compact Flash (CF) memory to maintain application files and data.
Disconnecting File Server from LAN
The file server can be disconnected from the LAN without affecting control
panel operation. However, a controller board will be unable to download
files until the LAN is reconnected and the JNS program is running properly.