Instruction manual

146 JUPITER CM-4400 Control Module Installation and Operating Manual
Section 5 — The Configurator Application
Figure 105. Jupiter Configurator’s Jupiter Menu
2. Select the Password option (or press the p key on the keyboard). This
selection will display the password table:
Figure 106. Jupiter Configurator’s Jupiter Menu
3. Select the password you want to change. Guidelines for using the editor
are found in the Entering or Editing Information in a Jupiter Table section
on page 119.
4. Type in the revised password. The password must consist of six
numbers.
5. Use the Tab key (or click) to select the Level field. Type in the revised
password level (if any). This must be a number from 00 to 99.