Instruction manual

JUPITER CM-4400 Control Module Installation and Operating Manual 151
Network Description Table
6. Enter the address of the second unit if the board is redundant.
• Even though they have the same name, the two boards will have
different addresses on this table.
•See Installing Redundant CM-4400 Control Modules on page 50.
7. Select Save from the File menu (File> Save) to save the table.
8. Click the Ok button to close the table.
Note To delete a board, click on the row number box and press DELETE.
Select the next table for editing. When finished, validate, compile, and acti-
vate the configuration set. (See Validating, Compiling, and Activating (Down-
loading) a Configuration Set on
page 133 if you need more information.)
Note A CM-4400 needs to be removed from the system if that CM-4400 has been
removed from the configuration set. If the CM-4400 is not removed, there is
a possibility for IP address conflicts.