Instruction manual

160 JUPITER CM-4400 Control Module Installation and Operating Manual
Section 5 — The Configurator Application
e. Triton switchers, when controlled by Jupiter, use a level scheme
different than that described in the Triton manual. In Jupiter
applications, split switching requires each level to be assigned a
different number.
9. Enter the name of switcher and the logical level that this level is to
follow permanently in the Follow Level’s field. For video/audio
switchers these boxes are usually left blank, thus allowing for split
(breakaway) switching.
For switchers where split switching is not desirable (such as RGB
switchers), this entry can be used to force one level to follow another;
for example, “Red” could be entered in the Follow Name box on the
menus for the Green and Blue levels. (This entry is not needed for Triton
RGB/YUV applications.)
Jupiter does not support follow level
switching when switch requests
are issued from the JNS Physical Control application.
10. Select the preferred distribution switcher protocol (“Driver”) from the
Driver drop-down list. Use the following table as a guide:
Table 8. Switcher Protocol Selections
Switcher Driver
Apex Binary
Concerto (Controlled via Crosspoint Bus) Binary
Concerto Data (Controlled via Crosspoint Bus) DM400B
Grass Valley Series 7000 (Controlled via SMS 7000) GVG Native Protocol
Grass Valley Encore•controlled router GVG Native Protocol
Mars Binary
SDR 400 Binary
Trinix Binary
Triton Trinton
Binary Confirm All (test) Bin Confirm all
Venus Binary
Venus Data DM 400/400A Binary
Venus Data DM 400B DM400B
Datatek D•2166/2000 Datatek
ESbus switcher ES Bus
Nexus NXS
Utah Scientific Party Line (UDI•1B) Utah_96