Instruction manual

166 JUPITER CM-4400 Control Module Installation and Operating Manual
Section 5 — The Configurator Application
Figure 116. Output Switcher Table for DM400B
Controller / Tributary Reassignment
Some VTRs can themselves act as controllers or tributaries. With the DM
400B the associated ports can be configured as both inputs and outputs; this
allows their pinouts to adjust automatically depending on which VTR is
selected as the output (controller) and which is selected as the input (tribu-
tary). In Figure117, VTR 1 is the controlling device; accordingly it is
selected as a switcher output in order to config
ure the switcher port cor-
rectly. The tributary VTR 2 is selected as a switcher
input.
Figure 117. Controller-Tributary Reassignment
In Figure118, the roles are reversed. VTR 2 is the master and VTR 1 is the
slave. The switcher ports are configured properly by selecting VTR 2 as an
output
and VTR 1 as an input.
826105_Switcher-Output for DM4
1
Switcher Output − MAINROUT
EDIT1 −
2 −
Name
Security S−T
Pass
word
RIGHTLEFT TC
000 000 000
DATA
000
VIDEO
000
Logical Output
071826105_Controller-Tributary Reassignment
Port 01
Controller
pinout
Tributary
pinout
Tributary
pinout
Controller
pinout
Port 02
DM 400B Data
Matrix
VTR 2 selected
as switcher
INPUT
VTR 1 selected
as switcher
OUTPUT