Instruction manual

JUPITER CM-4400 Control Module Installation and Operating Manual 173

The Control Panel Level Set

The CP Level Set table is used to assign levels to control panels. In most

cases, control panels are allowed to control all levels, but creating multiple

CP Level Sets allows restricting control to certain levels. Level Sets are

assigned to individual control panels on the MPK Devices table.

For steps activating the Control Panel Set dialog, see Creating a CP Set on

page 171.

Follow these steps to create a Level set:

1. Select the Level radio button in the upper-right corner of the Type of Set

area of the dialog. The names of any previously created Level set will

then appear in the Level Sets: window.

2. Enter an eight character name for the Level set in the Name field.

3. Select a Category set from the CP Type drop-down list or use the

“default” option.

4. Click the Apply button (Figure122). The name of the new level will then

appear in the Level Sets: window.

Figure 122. The Control Panel Set Dialog-Create Level Set

5. Select the new Level table and then click the Open Table button. The Level

Set table will then open.

Figure 123. The Control Panel Set Dialog-Create Level Set

CP Level Set — KXYZ−LVL

Mnemonic Level Break Switch

VID VIDEO (MAINROUT)

LEFT LEFT (MAINROUT)

RGHT RIGHT (MAINROUT)

4 TC TC (MAINROUT)

071876600_CPLevel.