Instruction manual

JUPITER CM-4400 Control Module Installation and Operating Manual 181
The Control Panel Output Set
7. Click the OK button to save the table.
Optional Entries
1. Select a Level set from the Level Set drop-down list. This set is used for
assigning a CP Level Set to individual outputs (multiple switcher
installations).
The Level Set column is used when there are multiple switchers in the
system and you want the control panels to control and status more than
one switcher.
2. Enter a number in the Button column. The button number can be used
to permanently assign an output to a button on an expansion panel.
3. Save the changes
Copying a CP Output Set for Use with a Different Panel Type
See Copying a CP Input or Output Set for Use with a Different Panel Type on
page 177 for the steps to copy a set.