Instruction manual

JUPITER CM-4400 Control Module Installation and Operating Manual 191
The MPK Devices Table
The MPK Devices Table
Note MPK Devices are not supported by the AccuSwitch application. However, the
MPK Devices table is used for various configurations. For example, pass-
words, and device type settings.
The MPK Devices table is used when a PC is used as a Software Control
Panel. Password levels are also configured using this table. The MPK table
is used to configure the L-S and LCD panels using the CPES-SER type,
which is required for the 98 categories features.
The CPESXTND category has been added
to Device Type column of this
table. The CPESXTND device type is allowed to have 100 Event Sequences.
Note In previous releases of the Jupiter system, a Serial port had to be defined in
the Serial Protocol table and a serial device needed to be defined on that port
in the MPK Devices table. If a serial connection was not defined, the CM-4000
board would not start successfully. In the 7.8.1 version of Jupiter, Jupiter
XPress and AccuSwitch boards will operate without a serial device defined.
Figure 141. The MPK Devices Table
MPK Devices Table Description
MPK Devices column: This column is used to create a name for each MPK
device in the system. Enter a name that is up to eight characters in length.
Device Type column: Se
lect the preferred type from the Device Type drop-
down list. Select type CPES-SER for panels to use up to 98 categories and
CPESXTEND to use the 100 Event sequences (or Salvos) feature.
Expansion check box: T
he Expansion box is checked when the panel is
used with an expansion panel. Not used for L-S or LCD Panels.
Password column:
Enter a number from 0 to 99 to assign a password level
(see Passwords on page 143).
Note Setting a password level 90-99 will allow the Visual Status Display (VSD) to
force unlock or un-protect any panel. See the Jupiter AccuSwitch Soft Panels
and Visual Status Display Instruction Manual for more information.
10RES-SEPC1PC1
1
1
20RES-SEPC2PC
1
MPK Devices
MPK
Expansion
Pass
Board
CM1
Port Address Input Sets Output Sets Level Set Overide Set Sequence Set
2
VEL_PCTUOPCNI_PC1MC
drowseciveD
In Panel Out Panel
61RES-SEPC61PC
16
VEL_PCTUOPCNI_PC1MC
10DNTXSEPC71PC
17
TUOPCNI_PC1MC
CP_LEV
CP_IN
CPOUT
CP_LEV
Ty p e
Device