Instruction manual

214 JUPITER CM-4400 Control Module Installation and Operating Manual
Section 5 — The Configurator Application
7. Enter the IP address for SYS1’s CM-4000 instead of the hardware
address in the Address field.
Switcher Description Tables
The Switcher Description tables must describe all the available routers,
with the CP Level Set tables used as mapping devices between the systems.
In the example shown here, both matrix router SYS1 and matrix router
SYS2 have a video level assigned in hardware as physical level 1 and audio
levels as 2 (Left) and 6 (Right).
The SYS1 Switcher Description Table
The Switcher Description table on the System 1 server is shown in
Figure158.
Figure 158. Example of the Switcher Description Table on the System 1 Server
In Figure158, rows 1 through 3 describe SYS1 or “the local” matrix router.
Rows 4 through 6 describe the matrix router on SYS2 or the “remote”
Jupiter sy
stem.
The Switcher column name must match t
he correct ES type entry in the
Board column from the Network description table if the Driver column
entry is ES_LAN.
For this example, the Board name selection shoul
d be SYS1 and the
Switcher name for the ES_LAN driver levels should be SYS2.
This applies to Figure159 as well.
Figure 159. The Switcher Column and Board Column Can be Different
1
Switcher Description
SYS1 SYS1 64 64 1 Binary None
2 SYS1 SYS1 64 64 2 Binary Left
3 SYS1 SYS1 64 64 6 Binary Right
4 SYS2 SYS1 64 64 100 ES_LAN 66 None
VIDEO
LEFT
RIGHT
VIDEO
5 SYS2 SYS1 64 64 101 ES_LAN 66 NoneLEFT
6 SYS2 SYS1 64 64 102 ES_LAN 66 NoneRIGHT
Switcher VI RV Board #In #Out PLvL Follow Level Driver Option 1 AudioLevel
DM 400
MC
Off Time
Option 2
Data
Options
Rows 1 through 3
describe SYS1
Rows 4 through 6
describe SYS2
1
Switcher Description
SYS1 SYS1 64 64 1 Binary None
2 SYS1 SYS1 64 64 2 Binary Left
3 SYS1 SYS1 64 64 6 Binary Right
4 SYS2 SYS1 64 64 100 ES_LAN 66 None
VIDEO
LEFT
RIGHT
VIDEO
5 SYS2 SYS1 64 64 101 ES_LAN 66 NoneLEFT
6 SYS2 SYS1 64 64 102 ES_LAN 66 NoneRIGHT
Switcher VI RV Board #In #Out PLvL Follow Level Driver Option 1 AudioLevel
DM 400
MC
Off Time
Option 2
Data
Options
The switcher will use the ES (ES-LAN Protocol) selection in the Type
column of the Network Description table.