Instruction manual

222 JUPITER CM-4400 Control Module Installation and Operating Manual
Section 5 — The Configurator Application
Figure 175. Example of the SYS1 Switcher Output Table on the System 1 Server
Entries on the SYS1 Switcher Output table are physical output numbers.
Only local outputs are entered on this table.
Figure 176. Example of the SYS2 Switcher Output table on the System 1 Server
Entries on the SYS2 Switcher Output table are index numbers (not physical
output numbers). Only remote outputs are entered on this table.
CP Output Sets - SYS1 Server
Figure 177. Example of the CP Output Set Table on the System 1 Server
The inclusion of outputs to both systems the CP Output Set allows
bi−directional control (by excluding the outputs, you can restrict control).
Figure 178. Example of the SYS2 Switcher Output table on the System 1 Server
Only local input names are entered on the Serial- type CP Output Set table.
71827512_SYS1 Switcher Output Table_SYS1
1
Switcher Output − SYS1
Name
1QCMON
Security S−T
−
VIDEO
000
2 1VT1 − 001
3 1VT2 − 002
4 1VT3 − 003
Pass
word
LEFT
000
001
002
003
RIGHT
000
001
002
003
Logical Output
71827512_Switcher Output table_SYS2
1
Switcher Output − SYS2
Name
2QCMON
Security S−T
−
VIDEO
000
2 2VT3 − 001
3 2VT4 − 002
4 2VT5 − 003
Pass
word
LEFT
000
001
002
003
RIGHT
000
001
002
003
Logical Output
From the fields on the
Logical Output column
of the CP Output Set
table on System 1
server table
This entry provides the
information for the fields
in the Serial−type CP
Output Set table on
System 2 server
071827512_CP Output Set table_SYS1
1
Output Set — KXYZ−OUT
Category
MON
Entry
1
Mnemnonic
1QCMON
1QCMON
Level Set Button
2
3
MON 2 2QCMON 2QCMON
VTR 1 1VT1 1VT1
4 VTR 3 2VT3 2VT3
Auto
Mnem
Logical Output
This entry provides the
information for the
Logical Output Name
column fields in the SYS2
Switcher Output table on
System 1 server
512_Serial−type CP Output Set table_SY
1
Output Set − SYS1OUT (SERIAL)
2
1
2
Entry
1QCMON
1VT1
3
3
1VT2
4 1VT3
0
Logical Output