Instruction manual

JUPITER CM-4400 Control Module Installation and Operating Manual 225
Section 6
Jupiter Board Status
The Board Status application displays the current status and information
for each CM-4400 (board) as they appear in the Network Description table.
It can be used to ensure that all system controllers are using compatible
software, user-created configuration sets, and that enough free memory is
available for the system to operate properly.
Most of this information also appears in the Jupiter Control Center on
page 229.
Figure 183. Board Status Application
Menus
Each menu and the available options are explained below.
File
Exit: Closes the Board Status application.
Options
Alarm Enabled: This menu option enables or disables an audible alarm. If
a board is inactive, or if its code or configuration CRCs do not match the file
server's active set, the application will beep if the alarm is enabled.