Instruction manual

226 JUPITER CM-4400 Control Module Installation and Operating Manual
Section 6 — Jupiter Board Status
Help
About: This menu option displays the application's About box with
version information.
Table Description
Each column in the Board Status table is explained below. The Board Status
table can only show Control Modules (CM) information, PC information is
not an option.
Figure 184. Board Status Application
First column: This unnamed column lists the board names in the order that
they appear in the Network Description table.
appName column:
This column shows the name of the board's operating
system code file. This file is found in the Jupiter active directory (C:\Pro-
gram Files\Thomson\Jupiter\active) and is downloaded to the
board if
the file changes or you clear the flash on the board.
brdAddr column:
This column shows the Ethernet hardware address for
the board.
Ticks column: This column shows an appr
oximate indication of the board's
up time or ticks. There are approximately 60 ticks/second for NTSC and
approximately 50 ticks/second for PAL.
Status column:
This column shows the current status of the boards that are
listed in the first column. The field will be green if the board is active and
red if the board is inactive.
The fifth and sixth columns show the cycli
c redundancy check (CRC) for
the board's application and configuration files. If these match what the file
server has for the active set, the fields will be green. Otherwise, the fields
are red-indicating the need for a fresh download to all boards.