Instruction manual

230 JUPITER CM-4400 Control Module - Installation and Operating Manual
Section 7 — Jupiter Control Center
Options Menu
Scan Rate: Select the correct scan rate for your system for board up-time to
be displayed correctly:
• NTSC - Select this opti
on if you use NTSC.
• PAL - Select this option if you use PAL.
Time Sync: Th
is item does not apply to CM-4400 units (it is used by the VM
3000, which is described in a separate manual).
Time Sync Help: Selecting
this item will open a pop-up window that pro-
vides information about Time Sync, such as which Time reader has priority.
Note For information about time sources and synchronization for AccuSwitch
applications, see The Time Standard Table on page 204.
Help Menu
About: Displays the Control Center’s About box with version information.
The JNS Control Center Tabs
The JNS Control Center has four tabs:
Board Status: The Boar
d Status tab shows a list of boards with the board’s
status and up time.
TFTP Status: The TFTP St
atus tab shows the state of Trivial File Transfer
Protocol (TFTP) transfers to boards.
Board Info/Control: The Boar
d Info/Control tab allows you to see board
information and send commands to boards.
Configuration:
The Configuration tab allows you to select configurations
and activate them.
Board Status
The Board Status tab shows a list of boards and each board’s status and up
time.