Instruction manual

JUPITER CM-4400 Control Module - Installation and Operating Manual 231
Figure 186. The Board Status Tab of the Control Center Application
Board column: This column lists the board names in the order that they
appear in the Network Description table (note that PC boards do not
appear here).
Status column:
This column shows the board status. The fields will be
green if the board is active. If boards are inactive, the phrase “Inactive” will
appear in the field and the field will be red. If a board is currently down-
loading, the phrase “LOADING...”
will appear in the field, and the field
will be cyan.
Up-time column:
This column shows how long the boards have been up in
days, hours, minutes and seconds. For the up-time display to be accurate
you must have selected the correct Scan Rate option in the options menu
(see below).
TFTP Status
The TFTP Status tab shows TFTP status while the boards are in the process
of downloading.
Figure 187. The TFTP Status Tab of the Control Center Application
Board column: This column lists the boards in the order that they appear
in the Network Description table (again, PCs do not appear).