Instruction manual

JUPITER CM-4400 Control Module Installation and Operating Manual 241
Section 8
The Router Control
Application
The Router Control Center application provides the ability to do simple
Takes in the currently active set using the control panel input, output, and
level set that use the cp3800 type sets. The Router Control dialog is accessed
by clicking the
JNS Application button at the top of the JNS Control Console
application and then clicking the
Router Control button in the JNS Applica-
tions group.
Figure 199. The Router Control Application
Displaying Status
The table at the bottom of the dialog displays the status for the currently
selected output. Initially, the grid will be empty because no output is
selected.