Instruction manual

JUPITER CM-4400 Control Module Installation and Operating Manual 265
CM-4400 System Codes
Table 16. Messages 31 to 38
Message Number Short Message Detailed Description
31 Scheduling configuration swap Because the system is a high-performance system a
requested configuration change will be deferred till the
system completes its high-priority tasks. This typically
takes only a few seconds.
32 Checking CRC of %s This is an informational message indicating that the
CRC of the specified file is being checked. This allows
the system to ensure that no file corruption occurred.
33 %s is up to date This is an informational message indicating the speci-
fied file is up to date and need not be reloaded to the
system.
34 %s saved as %s This is an informational message indicating that the
specified file was downloaded successfully and
renamed.
35 Downloading file %s This is an informational message indicating that the
specified file is being downloaded.
36 Cannot download file \“%s\” (Error
number 0x%X: %s)
The file download failed. This is typically a critical
error. Contact Grass Valley Technical support.
37 %s CRC failure, Com-
puted=0x%04x Expected=0x%04x
The CRC on the downloaded file was not correct. This
indicates a corrupted file. Contact Grass Valley Techni-
cal support.
38 Downloaded %s - %d bytes in
%ld mS
The file download failed. This is typically a critical
error. Contact Grass Valley Technical support.
Table 17. Messages 39 to 41
Message Number Short Message Detailed Description
39 %s CRC failure, Com-
puted=0x%04x Expected=0x%04x
The CRC on the downloaded file was not correct. This
indicates a corrupted file. Contact Grass Valley Techni-
cal support.
3A Downloaded %s -- %d bytes in
%ld mS
This is an informational message indicating that the
specified file was downloaded (giving the byte count
and the time required to download it).
3B Configuration successfully loaded This is an informational message indicating that the
specified configuration was successfully loaded.
3C Could not create UDP socket errno
= 0x%x
There may be a problem with the LAN hardware or
external LAN connections. This is typically serious.
Contact Grass Valley Technical support.
3D Could not shutdown UDP socket
errno = 0x%x
There may be a problem with the LAN hardware or
external LAN connections. This is typically serious.
Contact Grass Valley Technical support.
3E Could not close UDP socket errno =
0x%x
There may be a problem with the LAN hardware or
external LAN connections. This is typically serious.
Contact Grass Valley Technical support.
3F Logical UDP port 0x%x overlaps
standard port at 0x%x
Error trying to use a reboot or com port that is already
in use via the Jupiter / BootP tasks. Check Jupiter com
and boot port numbers.
40 Could not bind UDP socket for port
0x%x errno = 0x%x
There may be a problem with the LAN hardware or
external LAN connections. This is typically serious.
Contact Grass Valley Technical support.