Instruction manual

272 JUPITER CM-4400 Control Module Installation and Operating Manual
Section 11 — Troubleshooting
Startup Codes
Shutdown Codes
Other Codes
Table 26. Startup Codes
Code Description
00 Advance to next code in sequence
01 Starting up the system
0B Initializing the bootp client
0C Initializing the control center client
10 Initializing the time keeper
20 Initializing the router status
28 Initializing the switch processor
30 Initializing the router switcher
40 Releasing application tasks to run
Table 27. Shutdown Codes
Code Description
E0 Shutting down the system
E4 Suspending applications tasks
E8 Abdicating control to slave board
EC Shutting down serial ports
F0 Saving router status
F4 Closing the switch log
F8 Closing the event log
FF The system is stopped
Table 28. Other Codes
Code Description
DE A critical disk error occurred
B4 Begin boot code in usrRoot
B3 Boot code count down begin console init
B2 Boot code count down begin pcmcia init
B1 Boot code count down begin mux init
BE Boot code error in mux lib
B0 Booting or running in boot command loop