Instruction manual

JUPITER CM-4400 Control Module Installation and Operating Manual 289
Matrix Router Control Buses
Figure 220. Connection to SMS 7000 Control System
Software Configuration
The CM-4400 connected to the SMS 7000 must be configured using the
Network Description table and Serial Protocol table.
The router must be defined on the Switcher Description table. From that
poi
nt, switcher inputs, outputs, a CP Level Set, and CP input/Output Sets
must be defined.
Figure 221. Cable for Connecting CM-4400 to SMS 7000 DB9 Port
See page 2−16 for a description of this cable
GNP protocol
to Series 7000 routing switcher
SMS 7000 control system
House time
code
(optional).
See pg.
2−64
CM-4400 System Controller
Serial Port
LAN
071826105_Connection to SMS 7000 Control System
1
6
R−
2
7
3
T−
8
4
9
5
R−
T+
to CM-4400
serial port
to SMS 7000
G Ground
R− Receive minus
R+ Receive plus
T+ Transmit plus
T− Transmit minus
DB9P
(male)
DB9
= twisted pair
1
6
2
7
3
8
4
9
5
T+
R+
G
G
R+
T−
071826105_Cabeling-CM-4400_SMS-7000-DB9