Instruction manual

302 JUPITER CM-4400 Control Module Installation and Operating Manual
Appendix B — Connecting Legacy and 3rd Party Routers
Figure 238. Example of the Serial Protocol Table
2. Double-click the protocol box that is associated with the Serial port. A
drop-down list will show the possible protocol types.
3. Select the P8R (SWP-08 Router Control) protocol.
4. Click anywhere in the table accept the entry. The Baud rates will be
selected automatically (Figure 235). The Baud rate can be changed by
clicking the drop-down list in the Baud rate column.
Figure 239. The P8R (SW-P-08 Router Control) Protocol on The Serial Protocol Table
5. Click the Apply button and then save your changes.
6. Compile and activate the Configuration set. (See The Configurator
Application on page 107
.)
Protocol
Baud Rate