Instruction manual

304 JUPITER CM-4400 Control Module Installation and Operating Manual
Appendix B — Connecting Legacy and 3rd Party Routers
P08 (SW-P-08 Control Panel)
The P08 (SW-P-08 Control Panel) driver will receive the following informa-
tion:
The P08 (SW-P-08 Control Panel) sends the following information:
When the P08 (SW-P-08 Control Panel) dr
iver is used, the following will
occur:
• The control panel level value is a combin
ation of the Pro-Bel SW-P-08
matrix and level values. The level is the matrix times 16 plus the level.
• The interface ACKS all messages that are received correctly even if they
are not implemented.
• The system responds to a CONNECT message with a CONNECTED
message only when the cross point is valid. Unsolicited CONNECTED
messages will be sent for confirmed TAKES to outputs in the control
panel set.
Table 36. P08 (SW-P-08 Control Panel) Received Information
Message Value
CONNECT 2
CONNECT_EXT 130
INTERROGATE 1
INTERROGATE_EXT 129
CONNECTED 4
CONNECTED_EXT 132
Single source name request 101
Single destination name
request
103
Single source name extended 229
Single destination name
extended
231
Table 37. P08 (SW-P-08 Control Panel) Sent Information
Message Value
TALLY 3
TALLY_EXT 131
CONNECTED 4
CONNECTED_EXT 132
Source name response 106
Destination name response 107
Source name response
extended
234
Destination name response
extended
235