Instruction manual

44 JUPITER CM-4400 Control Module Installation and Operating Manual
Section 2 — Hardware Installation
Additional Connections
The following connections are optional. Grass Valley offers the Basic XY or
Multi-Level XY soft panels, which allow local or remote control of the
Jupiter system. You can also connect a Master control system or a CB 300.
For more information about the CB 300, see The CB 3000 Control Buffer on
page 77.
1. Install the Software Control panels on a PC. Each Software Control
panel needs the connection information listed above in Configuring the
AccuSwitch Control Panels Connections on page 41. However, this
information is entered in the soft panel’s Router Connection Editor
dialog (see the Jupiter AccuSwitch Soft Panels and Status Display manual).
2. If your system includes a Master control system, connect the Master
control to either a serial port or to the Jupiter LAN. Follow the
configuration instructions for the Master Control system, which can be
found in the control system’s installation manual.