Owners Manual
28
Configuration Name As with naming sources, press the Conguration Name button to access the
keyboard used for customizing the conguration name. Congurations 1
through 5 can be renamed. Conguration 6 is reserved for Digital Bypass.
Remember to press Enter after making your changes to save the new name.
Configure Outputs Choose the output connectors you want enabled with this conguration. If a
subwoofer (or two) is used, a Bass Management button appears, allowing you to
set crossover frequency and slope, or enable stereo or two mono subwoofers.
Distance to Speakers When subwoofer is enabled, the Distance to Speakers button gives access to
audio delay functions. Both Main L&R speakers and Subwoofer(s) have delays
available since subwoofers are typically farther from the listener than the main
speakers. Used together, the subwoofer(s) may be seemlessly integrated with the
main speakers. Distance may be selected in meters with 0.05m steps or feet
(0.17ft or ~2” steps).
NOTE: If your L & R speakers are not equidistant from the
listening position, you could make an output conguration where
the sub is enabled (even if you don't have one), which gives access
to the Distance to Speakers settings. Enter the distances to L and R
speakers and on the Bass Management page, leave the box for L/R
HP Filter un-checked. is will ensure the L & R channels run full
range and the time delays you chose will be applied.