Owners Manual

45
Specifications
All specications are accurate at the time of printing. Classé reserves the right to
make improvements without notice.
General nGain Range -93 dB to +14 dB
nInput impedance (at 1kHz, single-ended / balanced) 50 kΩ
nOutput impedance (single-ended) 50 Ω
nOutput impedance (balanced) 200 Ω
nMaximum output level (single-ended) 9 Vrms
nMaximum output level (balanced) 18 Vrms
DAC Mode (Default mode, with all DSP features disabled, All inputs)
nFrequency response 5Hz - 90kHz
 (-3dB, sweep Fs=192kHz)
nHarmonic Distortion <0.0015% (20Hz to 20kHz)
 (measurement bandwidth: 90kHz)
nDynamic range 124dB
 (-60dBFS, Fs=44.1kHz, A-wtd)
nSignal-to-noise ratio
125dB
(A-wtd, 22kHz BW, ref 4Vrms)
nJitter
<40ps
(Coaxial in, Fs=44.1kHz)
DSP Mode (With any of the DSP features enabled and set to at)
nFrequency response 10Hz - 84.5kHz
 (50Ω source impedance)
nHarmonic Distortion <0.002% (20Hz to 20kHz)
 (measurement bandwidth: 90kHz)
nIntermodulation Distortion <0.002%
 (measurement bandwidth: 90kHz)
nMaximum input level - Single Ended 2.7 Vrms
(at 0dB gain) (+10.8dBu)
nMaximum input level - Balanced 5.4 Vrms
(at 0dB gain) (+16.9dBu)
nSignal-to-noise ratio
105dB (108dBA)
(22kHz BW, ref 4Vrms, A-wtd)
nCrosstalk -105dB at 100Hz
(one channel undriven - BAL/SE) -120dB at 1kHz
-120dB at 10kHz
nChannel Matching (Left to Right) +/- 0.06dB
nTone (0.5dB steps) +/- 6dB
nEQ (independant L/R, 0.5 dB steps) 5 band, +3dB/-20dB