Owners Manual

46
Continued
Bypass Mode (When ‘Bypass’ is selected for any of the XLR/RCA inputs)
nFrequency response 1Hz - 2MHz
 (-3dB, 50Ω source impedance)
nHarmonic Distortion <0.0004% at 1kHz
 (measurement bandwidth: 90kHz) <0.0005% at 10kHz
 <0.0006% at 20kHz
nIntermodulation Distortion <0.0001%
 (measurement bandwidth: 90kHz)

nMaximum input level - Single Ended 4.5 Vrms
(at 0dB gain) (+15.3dBu)
nMaximum input level - Balanced 9 Vrms
(at 0dB gain) (+21.3dBu)
nSignal-to-noise ratio
130dB (133dBA)
(22kHz BW, ref 9Vrms, A-wtd)
nCrosstalk -143dB at 100Hz
(one channel undriven - BAL/SE) -140dB at 1kHz
-124dB at 10kHz
nChannel Matching (Left to Right) +/- 0.03dB
Phono (Measured 0dB gain, Bypass Mode, XLR Phono)
nRIAA deviation (20Hz - 20kHz) < 0.2dB
nLoad options for MM type (47k II) 50pF, 100pF, 150pF,
200pF, 250pF, 300pF,
350pF, 400pF, 450pF
nLoad options for MC - low output 7.5Ω, 10Ω, 33Ω, 50Ω,
82Ω, 100Ω, 330Ω, 1kΩ
nLoad options for MC - high output 47kΩ
nMM, MC - high output

Gain (1kHz, 20Ω source impedance) 41.5dB

SNR (22kHz BW, ref 5mVrms) 86dB (93dB A-wtd)

Max input level (overload ref 5mVrms) 11dB (20Hz)
23dB (1 kHz)
34dB (10kHz)
nMC - low output

Gain (1kHz, 20Ω source impedance, 1kΩ load) 60dB

SNR (22kHz BW, ref 0.5mVrms) 68dB (74dB A-wtd)

Max input level (overload ref 0.5Vrms, 1kΩ load) 12dB (20Hz)
31dB (1 kHz)
52dB (10kHz)
Headphone nPower 540mW
 (nominal input, 0dB gain, 32Ω load)
nOutput impedance 6.8Ω