Owner`s manual

Timeout If you prefer listening to music in a dimly-lit or darkened room or the SSP is in

your eld of vision while watching movies, you may nd even the low brightness

settingofthedisplaysomewhatdistracting.Youcanessentiallyturnothe

touchscreen by reducing the timeout value of the backlighting so as to turn

it o entirely after a period of inactivity that you may select. In this context,

activity refers to any use of the user interface. is includes hard buttons, the

touchscreen, and the remote control.

For example, if you reduce the timeout to its minimum setting, the backlighting

illuminates the display as soon as you interact with any of the SSP controls, and

remains lit for only three seconds – just long enough for you to check a setting.

If you continue to use any of the controls (at least once every three seconds), the

display remains lit. After three seconds of inactivity on your part, the backlight

extinguishes itself, essentially turning o the touchscreen.

If you prefer the display of the SSP to remain on whenever not in Standby

mode, select the Never timeout option. e lamp in the touchscreen display is

designed for harsh automotive environments and will give you many years of

reliable operation. If you plan to leave the unit on continuously, however, we

recommend that you keep the timeout delay set to less than one minute.

NOTE: setting the brightness to a lower setting does not increase

the life of the lamp.

On Screen Display eOnScreenDisplay(OSD)appearswhenevertheMENUbuttonispressed.

WhenintheMENUsystem,theMAINOSDshowsthefullscreenimageasit

appears on the touchscreen. In normal operation, when changes occur such as

volume, source selection, stream type, etc., a smaller, temporary OSD appears

momentarily to identify and conrm that the change has occurred. Each of

these OSD events may be individually enabled and disabled by accessing the

OSDControlpage(pressthemorearrowontheOSDselectionpage).Youmay,

for example, wish to know when a stream type has changed but not want the

temporary OSD to appear every time you adjust volume. is page allows you

to customize the operation of the OSD to suit your requirements.