Owner`s manual
42
Mute Setup e Mute Setup page allows you to choose how the Mute button functions. e
options for mute control are:
• specic - allows you to select the exact value to which the volume is
attenuated. If the current volume is already below that level when muting
is engaged, the volume remains unchanged. e factory default is - - -,
which is fully muted.
• dampening - reduces the current listening level by a specied amount (e.g.
-25.0 dB).
EQ Setup eSigmaSSP’sParametricEQcapabilityallowsyoutobuildveryprecise
digital audio lters to help compensate for xed sonic irregularities dened
by the location and characteristics of your speakers, your room and your
listening position in the room. ese lters should be constructed based
upon audio measurements made by a well-qualied acoustical engineer. ese
powerful lters are made available in a completely manual fashion to help your
professional installer give you the best listening experience possible.
As many as nine lters can be built for each speaker channel. An Aux channel
used in bi-amp mode assumes the same lters as dened for its Left or Right
channel partner.
In order to dene the PEQ lters, select EQ Setup from the System Setup
menu, Check the box to enable the EQ. Choose which channel you wish to
adjust, select a band and enable its lter, then tune it with the appropriate center
frequency, gain, and Q.