Owner`s manual
50
Configurations Youmaycreateuptosixdierentoutputcongurationstoaccommodate
preferences like with or without subwoofer, or with subwoofer but congured
for dierent crossover settings. While these congurations may be associated
with specic sources, they may also be called from the Main Menu page.
Pressing the Congurations button in the Main Menu opens the Congurations
page. Choose the conguration you wish to employ. Note that this conguration
selection will be over-ridden whenever you change or re-select a source with a
dierent conguration assigned.
Tocustomizecongurations,seetheCongurationSetupdescriptioninthe
System Setup section.
Modes Although each source has a default processing mode associated with it, you
may from time to time wish to choose a dierent mode. By using this page you
may select from the available processing modes. Modes that are not available to
be used with the current signal type are greyed out. Changing sources will also
change the mode to whatever the Favorite Mode is for that source, so mode
selection should be seen as temporary.
Status e Status screen provides several items of information on the currently selected
source and conguration as well as access to information on the rmware
used in and the internal settings and sensors of the SSP. While on this page,
pressing the more button will access the CAN-Bus features for connected Classé
components.
CAN-Bus Classé’sControllerAreaNetwork,orCAN-Bus,providescommunicationand
coordinated control between similarly featured Classé
components. When
connectedwithotherCAN-Bus-equippedClass
é
components, the dierent
elements in the system are in constant communication, creating a “global”
network that delivers system wide status information and shared operational
features,allthroughthepreamp/processor’stouchscreendisplay.
Note that some CAN-Bus related features are initially not available for certain
new models and some components will require a software update to recognize
them on the CAN-Bus. Check the Classé website periodically for updates.