Owner`s manual

Rack-Mounting the

Sigma SSP

e Sigma SSP is designed to accommodate rack-mount installation. Professional

installation by an authorized Classe dealer is recommended.

TorackmounttheSSP,removethetwoside-panelscrews,rotateandiptheside

panel to position the rack “ear” along the front of the SSP and re-install the side-

panel screws. Repeat for the side panel on the opposite side. Remove the feet from

the bottom of the SSP.

Carefully install the SSP into the equipment rack using the appropriate screws

for the type of rack. It is easiest if two people perform the installation to avoid

the possibility of dropping the SSP or otherwise causing damage. Please allow for

adequate ventilation, usually two rack spaces above the SSP will suce.

Magnetically secured rack ear covers, provided in the accessory pack, may be used

to cover the screws and nish o the appearance.