Owner`s manual

1.2 Rear Panel

1) ANALOG AUDIO INPUTS (See *NOTE 1

below: Page 13)

a) AUD1 (Line level, balanced: XLR x 2 OR line level, single ended: RCA x 2) (PIN 2 = HOT)

b) AUD2 (Line level, single ended: RCA x 2)

c) AUD3 (Line level, single ended: RCA x 2)

e) AV1 (Line level, single ended: RCA x 2)

f) AV2 (Line level, single ended: RCA x 2)

g) AV3 (Line level, single ended: RCA x 2)

h) AV4 (Line level, single ended: RCA x 2)

These analog audio inputs accept a line level signal from any component equipped with the appropriate output

circuitry. With the partial exception of “a) AUD1,” the balanced input requires three-pin XLR connectors (Pin

2 = Hot), all analog audio inputs are single ended circuits with RCA-style terminations. The SSP-25 has no

internal provisions for MM or MC phono amplification/RIAA equalization but accepts line level outputs from a

wide variety of external step-up devices if desired.

2) DIGITAL AUDIO INPUTS (See *NOTE 1

below: Page 13)

a) AUD1 (multi-format S/PDIF: RCA x 1)

b) AUD2 (multi-format S/PDIF: RCA x 1)

c) AUD3 (multi-format S/PDIF: RCA x 1)

d) AV1 (multi-format S/PDIF: RCA x 1)

e) AV2 (multi-format S/PDIF: RCA x 1)

f) AV3 (Multi-format S/PDIF: RCA x 1)

g) AV4 (multi-format S/PDIF: Toslink x 1 OR Multi-format S/PDIF RCA x 1)

h) AV4 AC3 (Multi-format S/PDIF: RCA x 1) USED TO PLAY AC3 ENCODED LASER DISKS

ONLY

Except partially for “g) AV4,” these digital audio inputs accept standard S/PDIF digital signals via 75 ohm

coaxial cables with RCA-style connectors. The AV4 input also uses a Toslink-style optical connector for digital

source components with this type of digital output. AV4 is designed to be used with the optical digital output of

many laser disc players and/or DVD players.

3) VIDEO INPUTS

a) AV1 (Composite: RCA x 1)

b) AV2 (Composite: RCA x 1)

c) AV3 (Composite: RCA x 1)

d) AV4 (Composite: RCA x 1)

e) AV1 (S-Video: mini-DIN x 1)

f) AV2 (S-Video: mini-DIN x 1)

g) AV3 (S-Video: mini-DIN x 1)

h) AV4 (S-Video: mini-DIN x 1)

These inputs accept video signals from various video source components. Inputs a) through d) accept a composite

video signal while inputs e) through h) accept S-Video (Y/C) signals.