Owner`s manual

11
SSP-25 Rear Panel
4) VIDEO OUTPUTS
a) Main (Composite: RCA x 1)
b) Record (Composite: RCA x 1)
c) Main (S-Video: mini-DIN x 1)
d) Record (S-Video: mini-DIN x 1)
These video outputs direct video signals from various source components to selected destinations.
The Main (Composite) video outputs transfer a chosen source’s video signal and on-screen display
information to any monitor or TV set with a composite input. The Main (S-Video) output duplicates this
function for all components using the S-Video (Y/C) signal path.
The Record (Composite) video output directs the chosen source’s video signal to a video recording device.
No on-screen information appears at this output. The Record (S-Video) output duplicates this function for all
components using the S-Video (Y/C) signal path.
5) MAIN AUDIO OUTPUTS (Preamplifier outputs)
a) Multi-channel (L, C, R, LS, RS, & Sub line level, unbalanced: DB25 x 1)
b) Front (L & R line level, balanced: XLR x 2)
c) Multi-channel (L, C, R, LS, RS, & Sub line level, unbalanced: RCA x 6)
These outputs allow you to easily connect the SSP-25 to any power amplifier designed for consumer use.
The multi-channel DB25 output provides a convenient single-cable connection to multi-channel power
amplifiers and also insures channel-to-channel continuity between preamp/processor and power amplifier.
The front Left and Right XLR outputs provide balanced (Pin 2 = Hot) connections from the SSP-25 to power
amplifiers with balanced inputs. They are ideal for mixed use (music and movies) systems where the finest
audio reproduction is a prime goal.
The individual RCA outputs provide a convenient signal path to almost all power amplifiers.
You may use any of these connections in any combination that does not duplicate channel assignments. For
example, you may use the Front Left and Right channel balanced XLR outputs to connect the SSP-25 to the
power amplifier(s) for those speakers and either the RCA connectors or the DB25 connector for all other
channels. Similarly, you can use the DB25 output for five channels and the RCA Sub output for the subwoofer
if needed.
6) SECONDARY AUDIO OUTPUT
a) Record (L & R line level, unbalanced: RCA x 2)
The Record outputs allow easy connection to a VCR or any other recording device or the line level analog
output may be sent to a remote location. (Utilization of a patch bay or switch box would allow multiple use
distribution. The same source selected for the main output appears at the record output).