Owner`s manual

12
SSP-25 Rear Panel
7) IR (Infrared) REMOTE CONNECTORS
a) Main In (Xantech compatible: 3.5" mini-jack x 1)
b) Main Out (Xantech compatible: 3.5" mini-jack x 1)
The Main In jack allows connection of an external IR sensor that functionally replaces the SSP-25’s front
panel IR sensor. It is particularly useful in installations where the SSP-25 is placed in a closet or behind the
doors of an equipment cabinet where the front panel IR sensor would be blocked from receiving signals from
the hand held remote controller.
The Main Out jack transfers IR commands received from either the SSP-25’s front panel IR sensor or an
external sensor connected to the IR Main In jack to a remote IR repeater. This jack allows a wide variety of
source components to receive commands via their own built-in IR sensors.
8) MISCELLANEOUS
a) AC power switch
b) AC power cord receptacle
The AC power switch positively disconnects the SSP-25 from all AC power when it is in the OFF position,
even if the AC cord is connected to a live AC outlet. In the ON position, the SSP-25’s basic circuits (central
microprocessor and remote sensors) are always active (“Standby” mode) providing, of course, that the AC
cord is plugged into a live current source.
The AC power cord receptacle is the standard IEC-type used for test equipment, computers, and high quality
audio/video components. It accepts a wide variety of detachable AC power cords.
*NOTE 1
: The SSP-25 is able to recognize the character of input signals. It is able to differentiate between DTS
and AC3, as well as the difference between digital and analog. This means that though there only three
audio-only inputs you can have as many as six sources plugged in, if three are digital and three are analog.
(AUD1 must utilize an XLR connector). Please also note AV4 has three digital audio inputs and all three may
be used. AV4 AC3 for an output from a laser player playing Dolby Digital encoded disks. The second digital RCA input
can be used for input from the same Laser player when playing DTS or Dolby Pro Logic encoded disks. The
Toslink input could be used for connecting a DVD player, and the processor will recognize and play correctly the digital
input from DTS, or Dolby Digital (AC3) DVDs or any CD. (See further notes in set up sections).