Owner`s manual

SSP-25 Front Panel

7) MODE BUTTONS < & >

These buttons step back and forth through the SSP-25’s operating modes in the following sequence:

DTS® Cinema, DTS® Music, Analog Bypass, Mono (Center), Stereo, Stereo Surround, Dolby Pro Logic®,

Dolby Digital® (AC3). Utilizing the two buttons you can quickly arrive at the mode you desire.

8) MUTE BUTTON

This button fully mutes the SSP-25’s main outputs. A second push restores the previously selected operating

levels. Record output is unaffected. The Mute button provides a convenient way to lower the volume when

answering the telephone.

*NOTE

: Turning the volume up with the volume knob will remove muting, but turning down the volume while in

mute mode will not remove muting, but when muting is removed the new lower volume level will be present.

Muting can be removed either with the mute button or by turning up the volume slightly.

9) MUTE LED INDICATOR

This LED glows green when the SSP-25 is in the mute mode.

10) MASTER LEVEL CONTROL

This large knob changes the relative levels of all active main room channels simultaneously. Each

loudspeaker’s relative loudness stays in perfect balance with all other speakers as programmed during setup.

The Main Information Display shows the master level setting in numbers from “Volume: -80” (virtually no

output) to “Volume! +35” (maximum output).