VSX-80TXV_KU.book.fm 1 ページ 2006年3月14日 火曜日 午後6時6分 AUDIO/VIDEO MULTI-CHANNEL RECEIVER VSX-80TXV VSX-80TXV-S Register your product at www.pioneerelectronics.com (US) www.pioneerelectronics.ca (Canada) • Protect your new investment The details of your purchase will be on file for reference in the event of an insurance claim such as loss or theft.
VSX-80TXV_KU.book.fm 2 ページ 2006年3月14日 火曜日 午後6時6分 CAUTION – TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD. RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. ATTENTION – POUR PREVENIR LES CHOCS ELECTRIQUES, NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR, UNE PRISE DE COURANT, OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT.
VSX-80TXV_KU.book.fm 3 ページ 2006年3月14日 火曜日 午後6時6分 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
VSX-80TXV_KU.book.fm 4 ページ 2006年3月14日 火曜日 午後6時6分 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. Contents 01 Before you start 05 Listening to your system Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Checking what’s in the box . . . . . . . . . . . . . . . . . . . .
VSX-80TXV_KU.book.fm 5 ページ 2006年3月14日 火曜日 08 Other connections Using XM Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Connecting your XM Radio receiver . . . . . . . . . . . . . 41 Listening to XM Radio. . . . . . . . . . . . . . . . . . . . . . . . . 41 Using XM HD Surround . . . . . . . . . . . . . . . . . . . . . . . 42 Saving channel presets . . . . . . . . . . . . . . . . . . . . . . . 42 Connecting using HDMI . . . . . . . . . . . . . . . . . . . . . . . . 42 About HDMI . .
VSX-80TXV_KU.book.fm 6 ページ 2006年3月14日 01 火曜日 午後6時6分 Before you start Chapter 1: Before you start Features • Advanced Direct Energy design This receiver offers a new advancement in discrete design unique to Pioneer for high-power drivability, low distortion and stable imaging. Through symmetrical placement of power amplification units, this receiver generates equal amplifier power to all channels, eliminating the possibility of one channel dominating a particular sound field.
VSX-80TXV_KU.book.fm 7 ページ 2006年3月14日 火曜日 午後6時6分 Before you start 01 Ventilation Loading the batteries When installing this unit, make sure to leave space around the unit for ventilation to improve heat dispersal (at least 8 in. (20 cm) at the top). If not enough space is provided between the unit and walls or other equipment, heat will build up inside, interfering with performance and/or causing malfunctions.
VSX-80TXV_KU.book.fm 8 ページ 2006年3月14日 02 火曜日 午後6時6分 5 minute guide Chapter 2: 5 minute guide Introduction to home theater Home theater refers to the use of multiple audio tracks to create a surround sound effect, making you feel like you're in the middle of the action or concert. The surround sound you get from a home theater system depends not only on your speaker setup, but also on the source and the sound settings of the receiver.
VSX-80TXV_KU.book.fm 9 ページ 2006年3月14日 火曜日 午後6時6分 5 minute guide 02 DIALOG E PHASE S.RETRIEVER SYSTEM OFF INPUT RECEIVER SELECT SOURCE D.ACCESS CLASS +10 DISC ENTER AV PRE-PROGRAMMED AND LEARNING REMOTE CONTROL UNIT MENU TOP MENU TUNE DTV MENU ST ST ENTER SETUP GUIDE CATEGORY DVR 2 1 DVD TV CD CD-R T.EDIT RETURN TUNE BAND TV CONTROL DVR1 TV CTRL XM RADIO ROOM 2 TUNER RECEIVER TV VOL INPUT SELECT TV CH VOL Switch on the receiver and your TV.
VSX-80TXV_KU.book.fm 10 ページ 2006年3月14日 02 火曜日 午後6時6分 5 minute guide Problems when using the Auto MCACC Setup If the room environment is not optimal for the Auto MCACC Setup (too much background noise, echo off the walls, obstacles blocking the speakers from the microphone) the final settings may be incorrect. Check for household appliances (air conditioner, fridge, fan, etc.), that may be affecting the environment and switch them off if necessary.
VSX-80TXV_KU.book.fm 11 ページ 2006年3月14日 火曜日 午後6時6分 Connecting your equipment 03 Chapter 3 Connecting your equipment This receiver provides you with many connection possibilities, but it doesn’t have to be difficult. This page explains the kinds of components you can connect to make up your home theater system. Rear panel CENTER CENTE L 17 OUTLET SWITCHED 100 W(0.
VSX-80TXV_KU.book.fm 12 ページ 2006年3月14日 03 火曜日 午後6時6分 Connecting your equipment 10 AM and FM antenna terminals Use to connect indoor or outdoor antennas for radio broadcasts. Connecting antennas on page 19. 11 Multichannel pre-amplifier outputs Use to connect separate amplifiers for front, center, surround, surround back and subwoofer channels. Connecting additional amplifiers on page 45 (see also Installing your speaker system on page 17 for powered subwoofer connection).
VSX-80TXV_KU.book.fm 13 ページ 2006年3月14日 火曜日 午後6時6分 Connecting your equipment 03 2 Connect a composite or S-video output on your DVD player to the DVD/LD VIDEO or DVD/LD S-VIDEO input. Connect using a standard video cable or an S-video cable. Connecting your TV and DVD player VIDEO IN 3 Connect a coaxial-type1 digital audio output on your DVD player to the COAXIAL 1 (DVD/LD) input. Use a coaxial cable designed for digital audio.
VSX-80TXV_KU.book.fm 14 ページ 2006年3月14日 03 火曜日 午後6時6分 Connecting your equipment 2 Connect an optical-type1 digital audio output from your set-top box to the OPTICAL 2 (TV/SAT) input.2 Use an optical cable for the connection. Connecting a DVD/HDD recorder, VCR and other video sources This receiver has two sets of audio/video inputs and outputs suitable for connecting analog or digital video devices, including DVD/HDD recorders and VCRs.
VSX-80TXV_KU.book.
VSX-80TXV_KU.book.fm 16 ページ 2006年3月14日 03 火曜日 午後6時6分 Connecting your equipment About the WMA9 Pro decoder This unit has an on-board Windows Media® Audio 9 Professional1 (WMA9 Pro) decoder, so it is possible to playback WMA9 Pro-encoded audio using a coaxial or optical digital connection when connected to a WMA9 Pro-compatible player. However, the connected PC, DVD player, set-top box, etc. must be able to output WMA9 Pro format audio signals through a coaxial or optical digital output.
VSX-80TXV_KU.book.fm 17 ページ 2006年3月14日 火曜日 午後6時6分 Connecting your equipment 03 Installing your speaker system main surround speakers should always be connected as a pair, but you can connect just one surround back speaker if you like (it must be connected to the left surround back terminal). You can use speakers with a nominal impedance between 6 Ω to 16 Ω (please see Switching the speaker impedance on page 55 if you plan to use speakers with an impedance of less than 8 Ω).
VSX-80TXV_KU.book.fm 18 ページ 2006年3月14日 03 火曜日 午後6時6分 Connecting your equipment Bare wire connections Make sure that the speaker cable you’re going to use is properly prepared with about 3/8 in. of insulator stripped from each wire, and the exposed wire strands twisted together (fig. A). To connect a terminal, unscrew the terminal a few turns until there is enough space to insert the exposed wire (fig. B). Once the wire is in position, tighten the terminal until the wire is firmly clamped (fig. C). fig.
VSX-80TXV_KU.book.fm 19 ページ 2006年3月14日 火曜日 午後6時6分 Connecting your equipment 03 The diagrams below show suggested surround and surround back speaker orientation. The first diagram (fig. A) shows orientation with one surround back speaker (or none) connected. The second (fig. B) shows orientation with two surround back speakers connected. 90º to 120º Connecting antennas Connect the AM loop antenna and the FM wire antenna as shown below.
VSX-80TXV_KU.book.fm 20 ページ 2006年3月14日 03 火曜日 午後6時6分 Connecting your equipment Connecting external antennas To improve FM reception connect an external FM antenna to the FM UNBAL 75 Ω terminal. Plugging in the receiver Only plug in after you have connected all your components to this receiver, including the speakers. Caution • Handle the power cord by the plug part.
VSX-80TXV_KU.book.
VSX-80TXV_KU.book.fm 22 ページ 2006年3月14日 04 火曜日 午後6時6分 Controls and displays 13 Input source buttons Press to select an input source (press VIDEO SELECT repeatedly to select the video source (page 54)). 14 VIDEO/GAME INPUT See Connecting a component to the front panel inputs on page 16. 15 MCACC SETUP MIC jack Use to connect the supplied microphone. 16 SYSTEM SETUP Press to access the System Setup menu (see page 33). 17 RETURN Press to confirm and exit the current menu screen.
VSX-80TXV_KU.book.fm 23 ページ 2006年3月14日 火曜日 午後6時6分 Controls and displays 04 Display 1 2 3 4 5 6 7 8 9 10 SIGNAL MIDNIGHT TUNED L C R 2DIGITAL DTS VIDEO CONV. V.SB WMA9 Pro 96/24 MULTI-ROOM DIALOGUE LOUDNESS STEREO SL S SR OVER ATT TONE MONO SBL SB SBR DIGITAL LFE ANALOG AUTO dB SR+ Neo : 6 2PRO LOGIC THX ADV.SURROUND STEREO STANDARD SLEEP SP AB 11 12 13 14 1 SIGNAL indicators Light to indicate the currently selected input signal.
VSX-80TXV_KU.book.fm 24 ページ 2006年3月14日 04 火曜日 午後6時6分 Controls and displays 4 Number buttons and other receiver/component controls Use the number buttons to directly select a radio frequency (page 31) or the tracks on a CD, DVD, etc. Remote control RECEIVER SYSTEM OFF INPUT SELECT 1 2 SOURCE 12 Press RECEIVER first to access: 13 DVD TV DVR1 CD CD-R 3 4 D.ACCESS TV CTRL XM RADIO ROOM 2 TUNER RECEIVER 14 ANALOG ATT SLEEP SB ch SR+ DIMMER MIDNIGHT/ LOUDNESS DIALOG E PHASE S.
VSX-80TXV_KU.book.fm 25 ページ 2006年3月14日 火曜日 午後6時6分 Controls and displays 7 TV CONTROL buttons These buttons are dedicated to control the TV assigned to the TV CTRL button. Thus if you only have one TV to hook up to this system assign it to the TV CTRL input source button. If you have two TVs, assign the main TV to the TV CTRL button (see page 56 for more on this). TV – Use to turn on/off the power of the TV. TV VOL +/– – Use to adjust the volume on your TV.
VSX-80TXV_KU.book.fm 26 ページ 2006年3月14日 05 火曜日 午後6時6分 Listening to your system Chapter 5: Listening to your system Important • The listening modes and many features described in this section may not be available depending on the current source (for example, PCM 88.2 kHz / 96 kHz, DTS 96 kHz (24 bit) or WMA9 Pro), settings and status of the receiver. See Listening modes with different input signal formats on page 69 for more on this.
VSX-80TXV_KU.book.fm 27 ページ 2006年3月14日 火曜日 午後6時6分 Listening to your system 05 • 2 Pro Logic IIx MOVIE – See above (only available when you’re using two surround back speakers) • THX Surround EX – Allows you to hear 6.1 or 7.1 channel playback with 5.1 channel sources • 2 Pro Logic IIx MUSIC – See above • THX Select2 CINEMA – Allows you to hear 7.1 channel playback with 5.1 channel sources • Dolby Digital EX – Creates surround back channel sound for 5.
VSX-80TXV_KU.book.fm 28 ページ 2006年3月14日 05 火曜日 午後6時6分 Listening to your system 1 Press EFFECT/CH SEL repeatedly to select the setting you want to adjust. Depending on the current status / mode of the receiver, certain options may not appear. Check the table below for notes on this. 2 Use the +/– buttons to set it as necessary. See the table below for the options available for each setting. The defaults, if not stated, are listed in bold. 3 Press EFFECT/CH SEL again to adjust other settings.
VSX-80TXV_KU.book.fm 29 ページ 2006年3月14日 火曜日 午後6時6分 Listening to your system Choosing the input signal You need to hook up a component to both analog and digital inputs on the receiver to select between input signals.1 THX STANDARD ADV.SURR STEREO 05 The table below indicates when you will hear the surround back channel when playing various kinds of sources.
VSX-80TXV_KU.book.fm 30 ページ 2006年3月14日 05 火曜日 午後6時6分 Listening to your system • VirtualSB OFF – Virtual Surround Back mode is switched off Type of source Standard / THX SBch Processing / Virtual SB mode Multichannel sources ON b AUTO b ON b Dolby Digital EX/DTS-ES/WMA9 Pro encoded multichannel sources with 6.
VSX-80TXV_KU.book.fm 31 ページ 2006年3月14日 火曜日 午後6時6分 Using the tuner 06 Chapter 6: Using the tuner Tuning directly to a station Listening to the radio The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. If you already know the frequency of the station you want, see Tuning directly to a station below.
VSX-80TXV_KU.book.fm 32 ページ 2006年3月14日 火曜日 午後6時6分 Using the tuner 06 Naming station presets For easier identification, you can name your station presets. 1 Choose the station preset you want to name. See Listening to station presets below for how to do this. 2 Press T.EDIT (TUNER EDIT). The display shows STATION NAME, then a blinking cursor at the first character position. 3 Input the name you want. Choose from the following characters for a name up to four characters long.
VSX-80TXV_KU.book.fm 33 ページ 2006年3月14日 火曜日 午後6時6分 The System Setup menu 07 Chapter 7: The System Setup menu • Manual MCACC – Fine tune your speaker settings and customize the Acoustic Calibration EQ (see Manual MCACC setup on page 34). Making receiver settings from the System Setup menu • Manual SP Setup – Specify the size, number, distance and overall balance of the speakers you’ve connected (see Manual speaker setup on page 37).
VSX-80TXV_KU.book.fm 34 ページ 2006年3月14日 07 火曜日 午後6時6分 The System Setup menu • MR & S – Select to use the (surround back) B speaker terminals for an independent system in another room (see Multi-room listening on page 46). 3 When you’re finished, press RETURN. You return to the System Setup menu. Manual MCACC setup You can use the settings in the Manual MCACC setup menu to make detailed adjustments when you’re more familiar with the system.
VSX-80TXV_KU.book.fm 35 ページ 2006年3月14日 火曜日 午後6時6分 The System Setup menu • If you want to go back and adjust a channel, simply use / to select it. 3 When you're finished, press RETURN. You return to the Manual MCACC setup menu. Fine Speaker Distance 07 Listen to the reference speaker and use it to measure the target channel. From the listening position, face the two speakers with your arms outstretched pointing at each speaker.
VSX-80TXV_KU.book.fm 36 ページ 2006年3月14日 火曜日 午後6時6分 The System Setup menu 07 • See Problems when using the Auto MCACC Setup on page 10 for notes regarding high background noise levels and other possible interference. 2 Wait for the EQ Auto Setting to finish. 3c.EQ Auto Setting 3c.
VSX-80TXV_KU.book.fm 37 ページ 2006年3月14日 火曜日 午後6時6分 The System Setup menu 1 Tip • Changing the frequency curve of one channel too drastically will affect the overall balance. If the speaker balance seems uneven, you can raise or lower channel levels using test tones with the TRIM feature. Use / to select TRIM then use / to raise or lower the channel level for the current speaker. 4 When you're finished, press RETURN. You return to the Manual MCACC setup menu.
VSX-80TXV_KU.book.fm 38 ページ 2006年3月14日 07 火曜日 午後6時6分 The System Setup menu • Center – Select LARGE if your center speaker reproduces bass frequencies effectively, or select SMALL to send bass frequencies to the other speakers or subwoofer. If you didn’t connect a center speaker, choose NO (the center channel is sent to the other speakers). • Surr – Select LARGE if your surround speakers reproduce bass frequencies effectively. Select SMALL to send bass frequencies to the other speakers or subwoofer.
VSX-80TXV_KU.book.fm 39 ページ 2006年3月14日 火曜日 午後6時6分 The System Setup menu 07 3 Confirm your selected setup option. The test tones will start after you press ENTER. 3 When you’re finished, press RETURN. You return to the Manual SP Setup menu. 4c.Channel Level Test Tone Tip [ Manual ] Please Wait . . . 20 • For best surround sound, make sure the surround back speakers are the same distance from the listening position. Caution! Loud test tones will be output.
VSX-80TXV_KU.book.fm 40 ページ 2006年3月14日 07 火曜日 午後6時6分 The System Setup menu THX Speaker Setup If you have a complete THX speaker system, you should make this setting for the most effective results when using surround sound. See THX speaker system setup on page 19 for more on using a THX speaker system. 1 Select ‘THX Speaker Setup’ from the Manual SP Setup menu. 4.Manual SP Setup a.Speaker Setting b.Crossover Network c.Channel Level d.Speaker Distance e.THX Audio Setting f.
VSX-80TXV_KU.book.fm 41 ページ 2006年3月14日 火曜日 午後6時6分 Other connections 08 Chapter 8: Other connections Caution • Make sure the power is switched off before making or changing the connections. Using XM Radio XM is the leading provider of satellite radio service in the United States. Through two high-power satellites, Rock and Roll, XM Radio service offers over 150 channels of music, news, talk, sports and children's programming on a monthly subscription basis.
VSX-80TXV_KU.book.fm 42 ページ 2006年3月14日 火曜日 午後6時6分 Other connections 08 • You can press DISP to change XM Radio information in the front panel display. • The currently selected channel is automatically chosen (without pressing ENTER) after 5 seconds. Using XM HD Surround XM HD Surround uses Neural Surround™ technology to achieve optimal surround sound from XM radio. • While listening to XM Radio, press AUTO SURR for XM HD Surround listening. See About Neural Surround™ below for more on this.
VSX-80TXV_KU.book.fm 43 ページ 2006年3月14日 火曜日 午後6時6分 Other connections 3 To hear audio from your HDMI component through this system, make analog and/or digital connections as necessary. On the rear panel, you must connect to the audio jacks from a set of audio/video inputs (for example, DVR/VCR1 or DVR/VCR2 as shown in the illustration). • Without this connection, HDMI audio will still be output from your TV or plasma display (though no sound will be heard from this receiver).
VSX-80TXV_KU.book.fm 44 ページ 2006年3月14日 08 火曜日 午後6時6分 Other connections Second Zone speaker B setup Caution • Before making or changing the connections, switch off the power and disconnect the power cord from the power outlet. Plugging in components should be the last connection you make with your system. • Be careful not to allow any contact between speaker wires from different terminals.
VSX-80TXV_KU.book.fm 45 ページ 2006年3月14日 火曜日 午後6時6分 Other connections Caution • Most speakers with both High and Low terminals have two metal plates that connect the High to the Low terminals. These must be removed when you are bi-amping the speakers or you could severely damage the amplifier. See your speaker manual for more information. • If your speakers have a removable crossover network, make sure you do not remove it for bi-amping. Doing so may damage your speakers.
VSX-80TXV_KU.book.fm 46 ページ 2006年3月14日 08 火曜日 午後6時6分 Other connections Surround Back System multi-room setup Multi-room listening This receiver can power two independent systems in separate rooms after you have made the proper multiroom connections.1 Different sources can be playing in both rooms at the same time or, depending on your needs, the same source can also be used.
VSX-80TXV_KU.book.fm 47 ページ 2006年3月14日 火曜日 午後6時6分 Other connections 2 Press CONTROL. Make sure that any operations for the sub room are done while MULTI-ROOM shows in the display. If MULTIROOM is not showing, the front panel controls affect the main room only. 3 Use the MULTI JOG dial to select the source for the room you have selected. For example, CD sends the source connected to the CD inputs to the sub room.
VSX-80TXV_KU.book.fm 48 ページ 2006年3月14日 08 火曜日 午後6時6分 Other connections Switching components on and off using the 12 volt trigger Using this receiver with a Pioneer plasma display You can connect a component in your system (such as a screen or projector) to this receiver so that it switches on or off using a 12 volt trigger when you select an input function. However, you must specify which input functions switch on the trigger using the 12 Volt Trigger setup on page 53.
VSX-80TXV_KU.book.fm 49 ページ 2006年3月14日 火曜日 午後6時6分 Other connections 08 • Use a 3-ringed miniplug SR+ cable to connect the CONTROL IN jack of this receiver with the CONTROL OUT jack of your plasma display. Using the SR+ mode with a Pioneer plasma display When connected using an SR+ cable, a number of features become available to make using this receiver with your Pioneer plasma display even easier.
VSX-80TXV_KU.book.fm 50 ページ 2006年3月14日 火曜日 午後6時6分 Other Settings 09 Chapter 9: Other Settings The Input Assign menu You only need to make settings in the Input Assign menu if you didn’t hook up your digital equipment according to the default settings for the digital inputs, or if you have connected equipment using component video cables. 1 Press RECEIVER on the remote control, then press the SETUP button. An on-screen display (OSD) appears on your TV.
VSX-80TXV_KU.book.fm 51 ページ 2006年3月14日 火曜日 午後6時6分 Other Settings 09 Assigning the HDMI inputs • Default settings: HDMI - 1 – OFF HDMI - 2 – OFF If you used HDMI to connect your video equipment, you must tell the receiver which input terminal(s) you have used, so that you see the proper video signal when you select the input source. 1 Select ‘HDMI Input’ from the Input Assign menu. 5. Input Assign a.Digital Input b.Component Input c.HDMI Input 3 Select the setting you want to adjust.
VSX-80TXV_KU.book.fm 52 ページ 2006年3月14日 火曜日 午後6時6分 Other Settings 09 Dual Mono Setup • 1 1 Select ‘Dual Mono Setup’ from the Other Setup menu. a.DRC Setup b.Dual Mono Setup c.LFE ATT Setup d.SR + Setup e.Video Conv. Setup f. Multi Room Setup g.12V Trigger Setup :Return 2 6b.Dual Mono Setup 6.Other Setup a.DRC Setup b.Dual Mono Setup c.LFE ATT Setup d.SR + Setup e.Video Conv. Setup f. Multi Room Setup g.12V Trigger Setup Dual Mono [ CH1 :Finish :Return Choose the setting that you want.
VSX-80TXV_KU.book.fm 53 ページ 2006年3月14日 火曜日 午後6時6分 Other Settings 09 • OFF – No conversion between video formats. 3 When you're finished, press RETURN. You return to the Other Setup menu. Multi-Room and IR receiver setup • Default setting: Variable / Setting 1 If you’ve made multi-room connections (see Multi-room listening on page 46) you may need to specify your volume setting. Also use this menu to specify your IR receiver type (if necessary). 1 Select ‘Multi Room Setup’ from the Other Setup menu.
VSX-80TXV_KU.book.fm 54 ページ 2006年3月14日 10 火曜日 午後6時6分 Using other functions Chapter 10 Using other functions Making an audio or a video recording You can make an audio or a video recording from the built-in tuner, or from an audio or video source connected to the receiver (such as a CD player or TV).
VSX-80TXV_KU.book.fm 55 ページ 2006年3月14日 火曜日 午後6時6分 Using other functions 10 Using the sleep timer Resetting the system The sleep timer switches the receiver into standby after a specified amount of time so you can fall asleep without worrying about the receiver being left on all night. Use the remote control to set the sleep timer. Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this.
VSX-80TXV_KU.book.fm 56 ページ 2006年3月14日 火曜日 午後6時6分 Controlling the rest of your system 11 Chapter 11: Controlling the rest of your system Setting the remote to control other components 5 Use / to select the manufacturer’s name from the list then press ENTER. Most components can be assigned to one of the input source buttons (such as DVD/LD or CD) using the component’s manufacturer preset code stored in the remote.
VSX-80TXV_KU.book.fm 57 ページ 2006年3月14日 火曜日 午後6時6分 Controlling the rest of your system 11 S.DIRECT MCACC STANDARD ADV. SURR THX RECEIVER ISOPHASE SHIFT MULTI OPE CH VOL DVD MUTE STEREO SBch CH TV CH REC STOP MEMORY DTV INFO REC INPUT SELECT HDD DISP MPX TV VOL AUDIO SUBTITLE STATUS SIGNAL SEL DISC RETURN T.EDIT ST BAND TUNE TV CONTROL ENTER ST SETUP DTV MENU CATEGORY GUIDE ANALOG ATT CH LEVEL MENU TUNE AV PARAMETER TOP MENU ROOM2/3 RECEIVER ENTER D.
VSX-80TXV_KU.book.fm 58 ページ 2006年3月14日 11 火曜日 午後6時6分 Controlling the rest of your system 3 Press the button of the component for which you want to check the preset code, then press ENTER. The brand name and preset code appears in the display for three seconds. 2 Use / to select DIRECT F then press ENTER. The LCD on the remote prompts you for the button of the input source you want to control. Renaming input source names 4 Use / to switch direct function ON or OFF then press ENTER.
VSX-80TXV_KU.book.fm 59 ページ 2006年3月14日 火曜日 午後6時6分 Controlling the rest of your system 6 If necessary, press the input source button for the component whose command you want to input. This is only necessary if the command is for a new component (input source). 11 Using multi operations You can start multi operations with the receiver switched on, or in standby. AUDIO SUBTITLE DISP 7 Select the button for the command you want to input.
VSX-80TXV_KU.book.fm 60 ページ 2006年3月14日 火曜日 午後6時6分 Controlling the rest of your system 11 Controls for TVs Controls for other components This remote control can control components after entering the proper codes or teaching the receiver the commands (see Setting the remote to control other components on page 56 for more on this). Use the input source buttons to select the component.
VSX-80TXV_KU.book.fm 61 ページ 2006年3月14日 火曜日 午後6時6分 Controlling the rest of your system Button (s) Function Components ENTER/ DISC Multiple CD player Chooses the disc. Use as the ENTER button. VCR/DVD player Displays the setup screen for DVR players. DVR player Changes sides of the LD. LD player TOP MENU Displays the disc ‘top’ menu of a DVD/DVR DVD player. MENU player Displays menus concerning the DVD/DVR current DVD or DVR you are player using. Pauses the tape.
VSX-80TXV_KU.book.fm 62 ページ 2006年3月14日 12 火曜日 午後6時6分 Additional information Chapter 12: Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used.
VSX-80TXV_KU.book.fm 63 ページ 2006年3月14日 火曜日 午後6時6分 Additional information Symptom Remedy No sound from surround back speakers. • Check that the surround back speakers are set to LARGE or SMALL (see Speaker Setting on page 37). • Make sure surround back processing is set to SBch ON (see Using surround back channel processing on page 29). • If the source is Dolby Surround EX or DTS ES with no flag to indicate 6.
VSX-80TXV_KU.book.fm 64 ページ 2006年3月14日 12 火曜日 午後6時6分 Additional information Symptom Remedy Can't record audio. • You can only make a digital recording from a digital source, and an analog recording from an analog source. • For digital sources, make sure that what you’re recording isn’t copy protected. • Check that the OUT jacks are properly connected to the recorders input jacks (see Connecting analog audio sources on page 16). Subwoofer output is very low.
VSX-80TXV_KU.book.fm 65 ページ 2006年3月14日 火曜日 午後6時6分 Additional information Symptom Remedy Can’t adjust the Fine Speaker Distance setting (page 35) properly. • Check that the speakers are all in phase (make sure the positive (+) and negative (–) terminals are matched up properly). The display shows KEY LOCK ON when you try to make settings. • With the receiver in standby, press STANDBY/ON while holding down the MULTI ROOM CONTROL button to disable the key lock.
VSX-80TXV_KU.book.fm 66 ページ 2006年3月14日 12 火曜日 午後6時6分 Additional information Symptom Remedy Other components can't be • If the battery ran down, the preset codes may have been cleared. Re-enter the preset codes. operated with the system remote. • The preset code may be incorrect. Redo the procedure for entering preset codes.
VSX-80TXV_KU.book.fm 67 ページ 2006年3月14日 火曜日 午後6時6分 Additional information Surround sound formats Below is a brief description of the main surround sound formats you’ll find on DVDs, satellite, cable and terrestrial broadcasts, and video cassettes. Dolby 12 Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, “Surround EX”, and the double-D symbol are trademarks of Dolby Laboratories. DTS The DTS technologies are explained below. See www.dtstech.com for more detailed information.
VSX-80TXV_KU.book.fm 68 ページ 2006年3月14日 火曜日 午後6時6分 Additional information 12 WMA9 Pro can support up to 5.1/7.1 channel playback with sampling rates up to 24-bit/96 kHz. Using the unique WMA compression techniques, WMA9 Pro can deliver multichannel music and soundtracks over high-speed internet networks at low bit rates with minimal audio degradation.
VSX-80TXV_KU.book.fm 69 ページ 2006年3月14日 火曜日 午後6時6分 Additional information 12 you are watching is encoded in Surround EX, you can manually select the THX Surround EX playback mode, otherwise THX Select2 Cinema mode will apply ASA processing to provide optimum replay. • THX MusicMode For the replay of multi-channel music the THX MusicMode should be selected. In this mode THX ASA processing is applied to the surround channels of all 5.
VSX-80TXV_KU.book.fm 70 ページ 2006年3月14日 12 火曜日 午後6時6分 Additional information Multichannel signal formats SBch Processing Input signal format Standard THX Auto Surround Straight decoding WMA+THX CINEMA Straight decoding Dolby Digital EX 2 Pro Logic IIx MOVIEa 2 Pro Logic IIx MUSIC THX SURROUND EX 2 Pro Logic IIx MOVIE+THXa THX Select2 CINEMAa THX MUSICMODEa THX GAMES MODEa Dolby Digital EX 2 Pro Logic IIx MOVIEa DTS-ES (6.1 channel sources/6.
VSX-80TXV_KU.book.fm 71 ページ 2006年3月14日 火曜日 午後6時6分 Additional information 12 FM Tuner Section Specifications Amplifier section Continuous average power output of 110 watts* per channel, min., at 8 ohms, from 20 Hz to 20 000 Hz with no more than 0.09 %** total harmonic distortion (front). Continuous Power Output (20 Hz to 20 kHz, 8 Ω, 0.09 %) Front. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 W + 110 W Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VSX-80TXV_KU.book.fm 72 ページ 2006年3月14日 12 火曜日 午後6時6分 Additional information We Want You Listening For A Lifetime Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
VSX-80TXV_KU.book.fm 76 ページ 2006年3月14日 火曜日 午後6時6分 Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer Authorized Independent Service Company, or if you wish to purchase replacement parts, operating instructions, service manuals, or accessories, please call the number shown below. 800–421–1404 Please do not ship your product to Pioneer without first calling the Customer Support Division at the above listed number for assistance. Pioneer Electronics (USA) Inc.