Owner's Manual
20
e Delta PRE has up to 18 selectable source buttons which are all
interchangeable: Any source may be assigned to any button location and
associated with any connector.
Touch any source button on the touchscreen to select it as the current source.
e selected source button is shaded. If the source you want to choose is not on
this screen (and you have more than nine source buttons enabled), press the
button for the next page of sources. Or, press the
button to return to the
previous page.
e Delta PRE comes from the factory with fteen source buttons labeled and
enabled. To change the default settings and labels or to disable unused buttons,
see the Menu System.
The Menu System
e comprehensive menu system provides setup and conguration controls for
the Delta PRE. ese installation-specic features let you customize how the
Delta PRE works within the context of your particular system. Changes are
made on-the-y, which allows you to quickly set up and modify settings without
constantly being asked if you’re sure you want to make the change and pressing
enter to save. e Delta PRE stores settings in non-volatile memory whenever
the unit is put into standby, so it’s a good practice to put the unit into standby
after making changes. In normal daily operation this happens anyway, but if you
want to be sure a loss of power doesn’t erase your changes, putting the unit into
standby will give you extra assurance.
Pressing the Menu button on the front panel or remote control opens the main
Menu page, which is divided into six sections as shown below.