Owner's Manual
29
If you prefer the display of the Delta PRE to remain on whenever not in Standby
mode, select the Never timeout option. e lamp in the touchscreen display is
designed for harsh automotive environments and will give you many years of
reliable operation.
NOTE: setting the brightness to a lower setting does not increase
the life of the lamp.
Network Setup e Network Setup page displays the IP address of the Delta PRE and the
Network status.
Pressing the Restore Network Defaults button on this page re-enables DHCP
mode. In DHCP mode the Delta PRE obtains an IP address from a device on
the Network (usually the Wireless AP).
e Delta PRE includes a built-in web interface that can be used to congure
the system name, Network settings or update the Delta PRE software. To access
the interface, type the IP address displayed on the Network Setup page in the
URL line of your browser (e.g. 192.168.1.0) and hit return. Alternately if you
are using Safari on the Mac, you can “Show All Bookmarks” (See: Bookmarks
menu) and click on Bonjour and double click on your Delta PRE device listed
in the Webpage’s folder.
On the web page: Status Information will show the System Name and the
Firmware Version number.
Conguration will allow you to personalize the system name and congure the
unit’s IP address manually. It is strongly recommended to use DHCP rather than
attempt to assign a static IP address, but if one is required, an IT professional
should be involved in the installation.
EQ Setup e Delta PRE’s Parametric EQ capability allows you to build very precise
digital audio lters to help compensate for xed sonic irregularities dened
by the location and characteristics of your speakers, your room and your
listening position in the room. ese lters should be constructed based
upon audio measurements made by a well-qualied acoustical engineer. ese
powerful lters are made available in a completely manual fashion to help your
professional installer give you the best listening experience possible.
As many as ve lters can be built for each speaker channel. An Aux channel
not being used as a subwoofer assumes the same lters as dened for its Left or
Right channel partner.