Owner's Manual

43
Specifications
All specications are accurate at the time of printing. Classé reserves the right to
make improvements without notice.
General nGain Range -93 dB to +14 dB
nInput impedance (at 1kHz, single-ended / balanced) 50 kΩ
nOutput impedance (single-ended) 50 Ω
nOutput impedance (balanced) 200 Ω
nMaximum output level (single-ended) 9 Vrms
nMaximum output level (balanced) 18 Vrms
DSP Mode (Default mode using the DSP processor)
nFrequency response 10Hz - 84.5kHz
 (50Ω source impedance)
nHarmonic Distortion <0.002% (20Hz to 20kHz)
 (measurement bandwidth: 90kHz)
nIntermodulation Distortion <0.002%
 (measurement bandwidth: 90kHz)
nMaximum input level - Single Ended 2.7 Vrms
(at 0dB gain) (+2.5dBr)
nMaximum input level - Balanced 5.4 Vrms
(at 0dB gain) (+2.5dBr)
nSignal-to-noise ratio
105dB (108dBA)
(22kHz BW, ref 4Vrms, A-wtd)
nCrosstalk -105dB at 100Hz
(one channel undriven - BAL/SE) -120dB at 1kHz
-120dB at 10kHz
nChannel Matching (Left to Right) +/- 0.06dB
nTone (0.5dB steps) +/- 6dB
nEQ (independant L/R, 0.5 dB steps) 5 band, +3dB/-20dB
Bypass Mode (Bypassing the DSP modules and using pure analog)
nFrequency response 1Hz - 2MHz
 (-3dB, 50Ω source impedance)
nHarmonic Distortion <0.0004% at 1kHz
 (measurement bandwidth: 90kHz) <0.0005% at 10kHz
 <0.0006% at 20kHz
nIntermodulation Distortion <0.0001%
 (measurement bandwidth: 90kHz)

nMaximum input level - Single Ended 4.5 Vrms
(at 0dB gain) (+15.3dBu)
nMaximum input level - Balanced 9 Vrms
(at 0dB gain) (+21.3dBu)
nSignal-to-noise ratio
130dB (133dBA)
(22kHz BW, ref 9Vrms, A-wtd)