Operator`s manual

EC DECLARATION OF CONFORMITY
EC Declaration of Conformity
Chuck Clark
Director of Operations
Date: July 12, 2012
Jim White
Managing Director
Date: July 12, 2012
The Undersigned Manufacturer:
Schiller Grounds Care, Inc.
1401 Logan Street
Norfolk, NE 68701
EU Authorized Representative:
Earlsmere Limited
Unit 18 Valley Road
Station Road Industrial Estate
Wombwell, Barnsley, South Yorkshire, S73 OBS UK
Declare that the machine described below:
Make & Type…………………………………… Classen Hydro Sod Cutter
Category…………………………………………Hydro Sod Cutter
Series…………………………………………….SCHV 18/8
Engine……………………………………………Honda GX270
Speed…………………………………………….High idle governor setting 3600 rpm ±100rpm
Net installed power……………………………..6.3KW (8 HP)
Complies with the provisions of the following European directives and Amendments and the Regulations transposing
it into national law.
Machinery Directive………………………………….. 2006/42/EC
EMC Directive………………………………………….2004/108/EC
Noise in the Environment Directive………………….2000/14/EC (Annex V)
Vibration Directive……………………………………..2002/44/EC
Non Road Emissions………………………………….2002/88/EC
Sound:
Sound levels were determined in accordance with Directives 2000/14/EC (Annex V)and 2006/42/EC.
Guaranteed Sound Power Level.............................105 dB
Sound Pressure...................................................... 89 dB
Vibration:
Hand/arm vibration was measured at the right and left operator handles per ISO 5349-1-2001 and ISO 5349-2-2001.
Levels were calculated using ISO/DIS 5395-1, in accordance with 2002/44/EC. Only the highest of the left and right
readings is given.
Guaranteed Vibration Level....................................10.2 m/s²
Intended Use and Limits:
This machine is for cutting sod in grass areas grown for the purpose of harvesting sod, and general sod removal. It
is intended for use on at areas and small slopes. Loss of control may result on steeper slopes. It is not intended
for use in rocky areas.
P/N C800045 REV A