Instructions / Assembly

ManualsBrandsClassic Accessories ManualsOtherLunex RS-1 22 ft. - 24 ft. Boat Cover

D-ring sewn on the bottom hem

of the cover. Pull the rope under

the boat to the corresponding

D-ring on the opposite side.

Allowing plenty of rope to make a

knot, cut off the rope and tie into

the second D-ring. Repeat with

remaining D-rings.

5. Carefully singe the ends of the

rope with a match or lighter to

prevent fraying.

6. Adjust the fit as necessary for

your boat.

To Tow

1. Thread web through one ladder

lock, place web strap under the

boat and thread the opposing end

of web through the ladder lock

and cinch down tightly.

2. Use the two supplied elastic

cords to secure the cover at the

stern.

3. Adjust the fit as necessary for

your boat.

Care and Cleaning

If your boat cover becomes dirty,

it can be cleaned with lukewarm

water and a soft bristle brush. DO

NOT USE SOAP as it can damage

the protective coatings on

your cover.

To prevent pooling of water on

boat cover, we suggest a support

pole (not included).

Storage

A handy storage bag is provided

to store your boat cover in. Be

sure that it is completely dry

before storage.

CAUTION

If your boat is new, use of this

product is not recommended

within the first four weeks of

ownership of the boat. Some

compounds used in new

boats can release gases that

will cause the dyes in boat

covers to transfer to the boat,

potentially staining the boat or

its components. Boat covers

can be used safely after this

introductory period.

Tools

Scissors and matches or a lighter

Installation

1. Cover sharp points (such as

windshield corners) with cloth or

a sponge to avoid stressing or

tearing your boat cover.

2. Drape your cover over

your boat with the tapered

end marked

“FRONT” at the

bow.

3. Pull your

cover below the

rub rail around

the entire boat.

4. Tie one end

of the supplied

rope to the front

Instructions: Lunex RS-1

™

Trailerable Boat Cover

20-139-071001-00, 20-140-081001-00, 20-141-09-1001-00, 20-142-101001-00, 20-143-111001-00

20-159-071001-MFF, 20-160-081001-MFF, 20-161-09-1001-MFF, 20 -162-101001-MFF, 20-163-111001-MFF

12cB51_15389

CLASSIC ACCESSORIES, INC.

2013

classicaccessories.com

Summary of content (2 pages)

PAGE 1
Instructions: Lunex RS-1™ Trailerable Boat Cover CAUTION If your boat is new, use of this product is not recommended within the first four weeks of ownership of the boat. Some compounds used in new boats can release gases that will cause the dyes in boat covers to transfer to the boat, potentially staining the boat or its components. Boat covers can be used safely after this introductory period. D-ring sewn on the bottom hem of the cover.
PAGE 2
Mode d’emploi: Housse de bateau remorquable Lunex RS-1™ ATTENTION Si votre bateau est neuf, il est déconseillé d’utiliser cet article pendant les quatre premières semaines après avoir pris possession du bateau. Certains matériaux utilisés sur les bateaux neufs risquent de libérer des vapeurs et peuvent transférer les colorants de la housse au bateau et par conséquent tacher le bateau et ses éléments. Les housses de bateau peuvent être utilisées sans danger après cette période initiale. de bateau.