Instructions / Assembly

Instructions:

Installation

Your Golf Car Easy On Cover will provide years of protection when storing your golf car.

However, this cover is not designed for use while trailering your golf car.

1. Check for any sharp objects or corners that could stress your cover as you pull it on.

2. Unzip the back zipper and open the bottom snap on your cover. Pull the cover over the

top of your golf car with the zipper at the back.

3. Close the zipper and snap on the back and even the fit on the four corners as necessary.

Cleaning

Clean with a soft brush and lukewarm water or machine wash in COLD water. DO NOT

USE SOAP as it may remove the protective coatings added at the factory. Line dry or

machine dry on air or delicate.

Storage

A handy storage bag is sewn on the inside of your cover. To store just stuff your cover into

the bag. Avoid mildew - be sure your cover is dry before storing it in its bag for long

periods.

One Year Limited Warranty

This cover is factory warranted for workmanship and materials for one year

after purchase. Trailering or use during transportation of your golf car

will invalidate this warranty.

Made by

Classic Accessories, Inc., Kent WA 98032

72402 (page 1 of 2) 01.07.09

PAGE 1
Instructions: Installation Your Golf Car Easy On Cover will provide years of protection when storing your golf car. However, this cover is not designed for use while trailering your golf car. 1. Check for any sharp objects or corners that could stress your cover as you pull it on. 2. Unzip the back zipper and open the bottom snap on your cover. Pull the cover over the top of your golf car with the zipper at the back. 3. Close the zipper and snap on the back and even the fit on the four corners as necessary.