Instructions / Assembly

Fitting & Care Instructions
Installation
1. Drape your golf car enclosure over the roof of your golf car with zippered panel at the back.
2. Pull the cover from front to back onto the roof. Make sure the front of the roof enters the
cover pocket first.
3. Attach the 8 elastic hooded straps along both sides of the car (4 on each side).
4. Zip the rear panel down over the back of the car. See figure 1.
5. The side doors open with zippers. To keep the doors open roll them to the back and fasten
them with the provided straps. See figure 2.
6. There is a zippered opening in the back so you can easily load and unload your golf clubs. See
figure 3.
7. The front window rolls down and into the front hideaway pocket for storage. See figure 4.
Tip: If the clear vinyl windows on your cover
are wrinkled from storage you can smooth
them out with a hair dryer. Be sure to set the
dryer on low and hold it at an appropriate
distance.
Tip: Clean clear vinyl windows with mild soap
using your hands to avoid scratching the
surface.
Warranty
This product is factory warranted for workmanship and materials for 3 years from the date of
purchase.
40-12-012001-00 (page 2 of 2) 06.17.10