Replacement Part List

CAUTION
If your riding mower is new, use of this product is not recommended within the first four weeks
of ownership of the riding mower. Some compounds used in new machines can release gases
that will cause the dyes in seat covers to transfer to the machine, potentially staining the
riding mower or its components. Seat covers can be used safely after this introductory
period.
Fitting
Your Tractor Seat Cover fits backrests up to:
12 in. H x 14.5 in. L(seat) x 19 in. W (seat) (small)
15 in. H x 16.5 in. L(seat) x 19 in. W (seat) (medium)
Installation
Your seat cover has storage pockets on the back of the cover.
This side faces back.
Pull the seat cover over the seat back. Then pull the rest of the
cover over the seat front.
Use and Storage
A storage bag is provided to store your cover in. To avoid any
possibility of mildew be sure your cover is completely dry before you store it in the storage bag for a
long period.
Cleaning and Care
Clean your cover with a soft brush and luke-warm water. DO NOT USE SOAP as it may remove the
protective coatings added by the factory. Air dry.
Instructions: Tractor Seat Cover
do not iron
do not
pack wet
do not
use soap
line dry
no bleach
water
resistant
no tools
required
12314, 12324
11cH51_11720
CLASSIC ACCESSORIES, INC., KENT, WA USA 98032
©2011 classicaccessories.com